Terms of delivery:
1. Definition and scope
1.1Investmentcastingisaprocess by which a high surface quality can bemanufacturedthroughtheformation of dimensionally accurate casting.Thepatternsproducedbyinjection
moulding are heat disposable and aremeltedoutaftermanufacture of the ceramic moulds. The ceramicmouldsaredestroyed aftercasting. For this reason, both the patternandthemoulds are designatedlost
using this method. Castingusuallytakesplace into hot moulds.
1.2 Metals and nickel-based alloys can be used for investment casting.
1.3Thistechnicalmemorandumdoesnot apply precious metals cast using thedewaxingmethod,to productsofthe jewellery industry,dentallaboratories or toart casting.
2. Purpose
2.1Thistechnicalmemorandumdefinesdimensional tolerances, specifies machiningallowancesandsurfaceroughness corresponding to the startof the art inthe fieldofinvestmentcasting. It serves as
a basis for optimumeconomiccooperationbetweeninvestment casting suppliers and buyers.
2.2Thespecificationsmentionedherereferto sandblasted preserved or pickledsurfaces in theirdeliveredcondition.Exception must be agreedwherework processes areinvolved
which alter the dimensional tolerances.
2.3Unlessotherwiseagreed,initialsamples are supplied for first-timeorders.These are usedtopermitconcrete mutual agreement betweensupplier andpurchaser.Initialsamplesmust be
appraised by thebuyer,followed by awritten release tothefoundry for seriesproduction.Deviationacknowledged bythe releaseor withpositiveappraisal of theinitialsamples are binding for
theproductionprocessand must beentered intothe(casting) drawing.
3. Dimensional accuracy
3.1 Contraction and shrinkage
Duringthesolidificationandcooling of cast metals, a contraction ofthevolumenaturally occurs asaresult of shrinkage. Otherfactorsinfluencing the production ofinstrument
castingscan resultfromtheshrinkage of the lost patternand the expansion ofmouldsduringheating. The sum of these influencingfactors istakenintoconsideration in the shrinkage
allowance duringthemanufactureofinjection moulds. The shrinkage allowance isbasedonexperiencevalues,depending on the contour of the casting, theceramicshell andthe castingmaterials, as well as the
casting techniquesusedin theindividualfoundries.
3.2 Reference planes and reference points
Drawingusedinthemanufacture of casting must be gauged systematicallyusingreferenceorlocating points in order to ensure that dimensionalchecksandsubsequentmachining are in agreement. Reference
points mustbedeterminedright fromthe early design stage and coordinatedbetweenthezero positionof thereference planes is precisely defined bymeans ofthe referencepointdimensions. All reference
points must bearranged insuch a way thattheyare not removed or altered during thesubsequentmachiningprocess.Reference points should be positioned onthe outsidesurfaces oftheinvestment casting.They
may take the form ofraised orreferencepointsare beneficial when dealing with castingswithrestricted shapeandposition tolerances. When determining thereferencepoints,attentionshould be paid to
ensuring that they do notfall inthe area ofasprue. In case of complex shaping,it is possible inthisway topositionthe casting precisely by(pre-)machining thelocatingpoints.
3.3 Over definition
According to DIN 406, overde finition must be avoided. Wall thicknesses must always be specified.
3.4 Mould and draught angles
Mould and draught angles are not necessary as a general
rule.Exceptionstothisforreason of mould making or casting necessity must beagreedbetweentheinvestment casting supplier and the buyer.
4. Dimensional tolerances
4.1 Linear dimensional tolerances
Achievable dimensional tolerances on investment casting are dependent on the following factors:
Casting material
Dimensions and shape of the casting
Validity of the accuracy grade
4.1.2. Dimensions and shape of the casting
Theachievableaccuracylevelof the rated dimensions of an investmentcasting dependson thegreatestdimension and the shape of thecasting.If therateddimension(GTA)exceeds the rated dimension
rangeindicated foracertainaccuracy level,the overall tolerance of thecasting must betolerancedat the accuracylevel (greatest tolerancefield). Deviationoutside theaccuracy levelmust be agreed
between thesupplier andthebuyer.
Note: The technical infomation above are incomplete. Please contact us for more details.
Our Precision Investment Casting Technology has been applied in theproduction of:
A high standard of surface quality
Low material allowance on surfacesto be machined
Facility for complex shaped innercontours due to the use of ceramic cores
A high degree of dimensional accuracy due to elimination of the mould parting line usually responsible forcasting imprecision
Hardly any restrictions in terms ofmaterials
Almost unlimited scope for theshaping of castings
The investment casting technique is characterized by
Summary
Generallyspeaking,theinvestmentcastingtechnique is used for small pieceweights ofbetween 1gand 10 kg.Largerwork-pieces up to 150 kg are alsopossible.
Piece weights
Thecastingareproducedwithout any trace of flash, and with anexcellentsurfacefinish.In manycases-expect for producing the requiredseatdimensionsthere isno needfor a follow-on machining process.
Surface quality
Allcastable materials canbe processed using this method. Investmentcastingisparticularly suitableforuse with materials unsuited tomachining.
Material selection
Fullservice manufacturing of investment castings, including machining,heattreating, passivation, plating, polishing,and painting.
We offer stainless steel, carbon steel or alloy steel casting made by investment casting according to customer's design(OEM).
Clamp
Clamp made by investment casting according to customer's design.
Delivery Time: | Samples within 20-25 days, mass production within 30-35 days. |
Package: | Cartons and plywood cases, or according to customer's requirements. |
Supply Ability: | 10000 Piece/Pieces per Month |
Minimum Order Quantity: | 400 Piece/Pieces Negotiable |
Payment Terms: | L/C,T/T |
Port: | Guangzhou Huangpu |
Standard or Nonstandard: | Nonstandard |
Structure: | Other |
Material: | Stainless Steel |
Usage: | Glass Clamp |
Brand Name: | OEM offered |
Place of Origin: | Guangdong China (Mainland) |
KRD102 Clamping Force Tester KRD102 series clamp force tester is newly developed multi-functional economical carton quality inspection equipment, mainly used for household appliances, furniture, toys, kitchenware and other finished packaging to do clamping test. It can simulate ...
Come From CME Technology Co., Ltd.
TOPMB portable led work light with clamp, free up your desk space while providing you calm, bright lighting up your full workbench. Relieve eye strain when you spend a long time working or reading. Benefits of utility clamp work light Asymmetric Optics Angle light only lights ...
Stainless Steel Wire Clamp Stainless steel wire clamp was specially designed for extraction hoses with an outward spiral. Specifications of Stainless Steel Wire Clip Product Name Stainless Steel Wire Clamp Material Stainless Steel 304 Size 0.8-23mm Usage Pipe Clamp OEM Welcome ...
Come From ningbo atlas metal hardware co ltd
This GF6018A high precision multi-product calibrator is compliance with national verification regulation: JJG124-2005 \"Ammeter, voltmeter, power meter and resistance meter verification rules\" and related national standards. 0.05% single-phase standard AC/DC voltage and ...
Come From gfuvegroup
TOPMB clip on led reading lamp are perfect reading lights because they are easy to install on bookshelves, and windowsills...and can be easily moved when the clamp is opened by hand. Types of Clamp Lamp Super Bright Anti-glare Reading Desk Lamp With Swing Arms-WK005FD Highly ...
GF312B2 portable three phase reference meter high accuracy 0.02%, with all kinds of optional clamp on ct and smart optical sampler. It can be applied in electrical laboratory or on site. it will be ensured by a combination of measures such as the use of 24bit A/D converter, ...
Come From gfuvegroup
The model Q125 2000A current transformer clamp on measuring instrument can be used for a current vector for the copper bar or the power aluminum bus bar on-line detection. It has a 120mm * 50mm square hole, make it specially suitable for bus bar current measurement. In this ...
Come From gfuvegroup
The round jaw design on the S50 Series AC current clamp on CT along with the high content permalloy core makes them well suited for power quality applications where high accuracy and low phase shift along with wide frequency are important from 10Hz to 10MHz. Measurement range is ...
Come From gfuvegroup
The model Q150 current transformer clamp can be used in large current situation and cooperate to cable fault tester and cable identification device, used for cable test work. It can even measure up to 3000A AC large current and output 0-5A AC current for other measuring or ...
Come From gfuvegroup
The model XQ20 clamp on current sensor is suitable for 200A cable online measurement, the user friendly shape make It easily clamp onto cables or bus bars, no need to interrupt the power supply and disconnect the circuit in testing, easy to carry and especially suitable for ...
Come From gfuvegroup