Splicing Nut

The splices long tapered form allows the splice to easily run into a block where it could jam the line into the sheave. The SplicingNut forms a positive stop prior to the loop and thus prevents the line from jamming in the sheave.

Even the best tied bowline comes undone when it is shaken violently seldom does this happen under convenient circumstances. The SplicingNut will not back out, or come undone unless you want it to. The SplicingNut can be released under tension

The bowline knot is notorious for snagging at inappropriate moments. The low profile, bullet shape of the SplicingNut prevents this. The bitter end is secured, not flapping in the breeze.

Ease of use, if you can put a light bulb in, you can install a SplicingNut. Not so for splicing a braided line which requires a special tool ( a fid ) and a fair amount of knowledge and practice.

A SplicingNut is a two part device that mechanically forms a loop in braided line similar to a splice.