LED Fluorescent lamp

1. Product Model Part No.:
HCL-T10120P10CW-220


2. Product Features Features:
This product LED semiconductors using energy-saving light source, to replace conventional fluorescent tubes.
Adopting LED energy effiecient semi-conductor light source, this product has been the new generation of traditional fluorescent lamp.
high-brightness, high color, and life expectancy of up to 40,000 hours.
High brightness, high color rendering index, over 40000hrs long lifespan.
light color uniform, no aperture, no stroboscopic, green environmental protection, energy saving up to 85%.
Even lumination, no glare, no stroboflash, environmental friendly, up to 85% energy efficient.
unique circuit control design, without the use of ballast, starter, and output current fluctuation does not exceed 1mA.
Unique driver design, do not need ballast, starter, output current vibrate within 1mA.
lamp using 216 ultra-high brightness LED as a light source, the use of constant current LED technology ensures life.
216 pcs super bright LED light source, integrated constant current LED driver to ensure lifespan.
have warm white, cold white two color choices.
Warm white or cool white optional,
two working voltage AC110v, AC220v to choose from.
AC110V and AC220V two types of working voltage optional.

3. Applications Application:
apply to office buildings, factories, shopping malls, home interior lighting, etc..
Suitable for office, factory, emporium, home, etc. Indoor lighting.

4. Physical map Product picture 
 
5. Dimensions package dimension
(Note 2: Unit: mm, not marked Tolerance brine 0.5mm. Unit: mm, Unspecified Tolerances is brine 0.5mm) 
 
6. Internal circuit Intramural electrocircuit:

7. Driver (measurement) Circuit Driving (test) circuit:

8. Technical Data Technical data:
Parameter Value Unit Parameter Data Unit
Size Dimension :30xL1213 mm
Luminous Flux Luminous Flux 800-900 lm
Color Temperature Color Temperature 6000 ~ 6500 (Cool White) K
Color-rendering index Ra 0.75 --
Light-match angle Beam Angle 120 Deg 
Light Source Light Source 5 LED, 216Pcs --
Operating voltage range
Input Voltage AC190-265V AC 190 ~ 265 (50/60Hz) V
Rated Power Power 9.5-10.5 w
Life Lifespan> 40,000 Hours
Material Material PC card slot, aluminum lamp cap
PC Slot, Aluminium Cover --
Net Weight Net Weight 300 g
Operating temperature Working Environment -30 ~ +55
Adapt to the humidity Adaptive humidity 95% --
Storage conditions of storage condition -40 ~ +80 Protection Level Protection class IP20 CLASS1 --

 
9. Use Usage:
ordinary fluorescent lamp driver circuit (The drive circuit diagram of general fluorescent lamp)


LED fluorescent lamps with conventional stent assembly (LED light assembled on general fluorescent lamp bracket)
Method 1: conventional stent removed on the starter, and be able to retain the coil-type ballast (electronic ballast must be removed).
Method 1: Remove starter, remain the ballast (electronic ballast must be removed!).

Method 2: ballast and starter device dismantle all Method 2: Remove ballast and starter

10. NOTE:
The lamp operating voltage to 220V, in the Canadian job confirmed before electric voltage is correct, then mistakenly lamp voltage may cause permanent damage;
The working input voltage of this model is 220V, please ensure the right voltage before running. Wrong voltage may cause permanent damage.
Electricity in Canada, the body can not contact any part of the metal parts of lamps at both ends, otherwise there will be danger of electric shock;
To prevent electric shock, do not touch the light's metal parts on the ends after adding voltage.
lamp before use, check its intact nature and, if damaged, please do not use and notify suppliers;
Please check it before using the light, if there is some breakage, please notify supplier and do not use it.
Lamp job, do not touch; Do not touch the light when it's working.
If the replacement tube must first disconnect the power. Shut off the power before replacing the light.
 

11. Packaging Package:
 
12. In full compliance with the ROHS Directive: Fully complied to ROHS