Faceo Energy Saving Lamp

FAECO FK-128F 14W, 21w and 28W high performance energy saving lamp is a patented product, approximately 50 No. Of countries has been patented all over the world. There are no other substituted products against energy saving tube in tube at this moment. PerformanceFK-128F is designed Mainly for the replacement market to retrofit fluorescent tube from Traditional T8 tube to T5 tube by introducing-Tube in Tube-technology with built in high efficiency T5 tubes system inside the limited space. As tested and inspected by CLPE, high efficiency means high power factor more than 96, Total harmonic distortion less than 15% , total saving of power consumption can be up to 50% to 54% , long life time as compared with common type T8 tube. All the existing T8 lamp fixture has still been used but it takes all the advantage generated from T5 tube. No Sound and No FlickingFK-128F has introduced with the latest technology of T5 high wattage fluorescent lamps and electronic ballast system inside the limited space. Since the electronic ballast is the high frequency unit (30, 000 Hz to 50, 000 Hz) , the tube will have no sound and flicker when starting up the lamps. However, for the traditional T8 or T10 fluorescent lamps, they have to operate with the traditional magnetic ballast and starter, its working frequency is only 50 Hz or 60 Hz, which will cause flicker of lamp. A flickering lamp will influence man s mood, attention and vision. A no-flicker fluorescent lamp will provide man a quiet, comfortable and healthy lighting environment. Easy to replaceCLPE known that it is a trend to replace the existing T8 tube from T5 tube in Hong Kong. All government new projects, high performance electronic ballast with T5 tubes must be used and the existing government utilities project is now also retrofitting the old T8 tube to T5 tubes. Retrofitting by using ETIT have much advantages concerned: Replacement of FK-128F series to the traditional T8 Tube is so simple; its similar to the replacement method of Traditional fluorescent tubes. No Labour and No Re-wiring cost. Its can be direct plugged in to the existing fixture of T8 lamps. No need to install additional electronic ballast. No modification to the existing lamps fixture. Due to no labour cost involved in the retrofitting project, total investment can be returned less than 3-6 months