Ecoluxx T5 Energy Saver

EN55015
IEC61347-1
IEC61347-2-3
IEC61547
IEC61000-3-2-2000
IEC61000-3-3

 

The Ecoluxx T5 Energy Saver was rigorously tested for Electromagnetic emissions and immunity and complies with the following CE, EMC, KEMA and TuV standards:

The Ecoluxx T5 energy saver is equipped with the newest IC Technology and has on both sides Warm start (ignition), End of Life detection and Cut off.

Warm start

Warm start

Warm start

Warm start

Ignition

Yes

Yes

Yes

Yes

EOL

Yes

Yes

Yes

Yes

Cut-off

Yes

No

Yes

No

Reflector

> 0.99

> 0.99

> 0.99

> 0.99

Cos phi

35 W

35 W

28 W

28 W

Lamp power

42 Khz.

42 Khz.

42 Khz.

42 Khz.

ECG frequency

40 W

40 W

32 W

32 W

Power consumption

50-60 Hz.

50-60 Hz.

50-60 Hz.

Frequency

0.18 A

0.18 A

0.14 A

0.14 A

Current

80~230 V

280~230 V

80~230 V

80~230 V

Nominal voltage

T5 35 Watt

T5 35 Watt

T5 28 Watt

T5 28 Watt

Lamp type

EcoES35WR

EcoES35W

EcoES28WR

EcoES28W

Product code

Technical Specifications:

35W adapter with reflector. This adapter replaces the TLD58 T8 tube. The reflector focuses the light. This creates more light at the working position.

35W adapter without reflector. This adapter replaces the TLD58 T8 tube.

28W adapter with reflector. This adapter replaces the TLD36 T8 tube. The reflector focuses the light. This creates more light at the working position.

28W adapter without reflector. This adapter replaces the TLD36 T8 tube.

Common available types are:

• Up to 50% Energy Saving
• CO2 reduction
• Improved Light Quality
• Reduced maintenance costs ( 3 x longer life time)
• Environmentally friendly
• Long Term Solution

 

Some benefits after installing the Ecoluxx T5 Energy Saver:

 

Saver has a payback time of approximately two year.( depending on your electricity costs and operating hours)

It is the electronic ballast, which provides the excellent energy efficiency and also eliminates the slow ignition experienced with many T8 and all T12 fittings. The electronic ballast operates at 42 KHz so there is no stroboscopic flickering, which causes headaches and eye problems for many employees. The conversion to T5 fluorescent light tubes with the Ecoluxx T5 Energy

The Ecoluxx T5 Energy Saver is designed to bridge the gap between T8/T12 fixtures and the shorter T5 tube and incorporates a new type of high frequency ballast called Electronic Control Gear (ECG) that is designed to work specifically with the T5 fluorescent light tube.

The Ecoluxx T5 Energy Saver solution:

 

are all different.

compared to the old T8 / T12 tubes. The T5 tubes manufactured by companies like Osram, Sylvania, GE and Philips have the disadvantage that they are not suited for existing T8 / T12 lighting fittings. The lengths, the connections and the used ballasts

The T5 is a very efficient elegant 16mm light tube, providing excellent light with a lifespan of up to 30.000 hours (depending on brand) and energy savings up to 40%. It is environmentally friendly, containing 38% less glass with only a little mercury

New T5 Technology:

 

The Ecoluxx T5 energy saver is fully developed in Europe to European standards.

upgrade your inefficient and outdated T8 and T12 fluorescent lamps to the new energy saving and environmentally friendly T5 fluorescent lamp. This all without changing the existing fitting. The Ecoluxx T5 Energy Saver allows you immediately to enjoy the benefits of the new T5 technology without the need to replace/adapt existing lighting fittings.

The Ecoluxx T5 energy saver converts existing T8 & T12 fluorescent fittings with conventional ballast into high efficiency T5 lighting systems. The Ecoluxx T5 energy saver is a high frequency ECG device (Electronic Control Gear) which allows you to

The Ecoluxx T5 Energy Saver

T5 adapter converts existing T8 & T12 fluorescent fittings into high efficiency and energy saving T5 lighting systems