Surface Floodlight with Perimeter Light Model 700

--------------------------------------------------------------------------------
 
 

--------------------------------------------------------------------------------
 
 

With the release of FAA Advisory Circular 150-5390-2B; it recommends for heliport installations in the United States, there be no equipment or structures within the boundary of the Safety Area greater than 2 inches above the level of the TLOF (landing surface) with one exception: a perimeter light no higher than 8 inches above the level of the TLOF is allowed in the Safety Area.
 
Surface Floodlight
Model 700
 
 
 
 

When installed on some types of heliports, you should follow the recommendations of the ICAO Heliport Manual 9261-AN/903. The floodlighting should be mounted outside the boundary of the TLOF (landing surface) such that the highest point on the installed light is not more than 10 inches (25 cm) above the level of the TLOF. Please be informed of these guidelines.

Please Note:
All customers ordering floodlighting should be aware of the following:

Dimensions:
Height: 13 Inches
Width: 19 Inches
Length: 19 Inches
Weight: 38 pounds
Finish: Polyester Powder Coating

Specifications
Case - Heavy Cast Aluminum
Lens - Heat Resistant Glass
Flood lamps - Par 46, 150 Watt Sealed Beam
Perimeter Lamp - 35 Watt Incandescent
Lens Guard - Stainless Steel
Power - 120 VAC, or other

Surface Floodlight
The Model 700 is housed in a weather-tight, machined aluminum casting to withstand hard use. It has a low profile, being only 13 inches high, 19 inches wide and 19 inches long, with three extension tabs to permit bolting to a concrete slab or a metal plate, for easy installation. It is finished in orange thermosetting powder coating polyester for maximum resistance to corrosion.

All Lights In One Circuit
Inexpensively wired, (with all lights in one circuit) it is possible to add or subtract floodlights where indicated and the utmost in flexibility is achieved. Power may be 120 VAC or 220 VAC as may be desired.

Double Duty Fixture
The Model 700 Surface Floodlight not only illuminates the center of the pad, but also has an omni-directional yellow perimeter light in its cover to outline the pad. A stainless steel wire guard protects the perimeter light lens.

Floodlighting Without Glare
Floodlights fully illuminate the landing area uniformly and provide excellent depth perception. The low vertical beam, combined with an extension visor, completely eliminates any glare. The lamp filaments cannot be seen, even when standing in the center of the pad.

Surface Floodlights Provide Reflected Light for Added Visibility
The Surface Floodlight is specially designed for helicopter landings and reflect the surface, whether it is plain concrete or painted with reflectorized paint. Perimeter lights alone do not reflect the surface of the pad. Two high intensity sealed beam floodlights, each having a very wide horizontal and a very narrow vertical beam spread, are adjacently mounted in one fixture so that their combined beams are projected over a 100