Odyssey flood lights

range of compact general purpose floodlights, suitable for security, highmast, sport and signage floodlighting, where high efficiency and good optical controls are required.Principal Features Practical range of medium floodlights Wide or medium beam versions Dust and moisture proof - IP 66 (lamp & gear compartments) High Pressure die cast LM6 aluminium head piece - powder coated High Pressure die cast LM6 aluminium gearbox - powder coated Low windage area Robust construction - 20 years guarantee on body & gearbox Optional nylon conduit to to protect cabtire from harsh enviroments,birds,etc Description Construction: The headpiece, control box and lampholder cup are high Pressure die cast LM6 aluminium, power coated for a corrosion resistant finish. All external nuts and corner clamps are manufactured in stainless steel. Stirrup bracket is galvanized steel. Control gear: The choke, capacitor and ignitor ( when required ) are fastened to a removable geartray in the gearbox. All control gear is SABS/IEC approved. Power factor corrected >0.85 Lampholder: As required for the lamp type, porcelain. Front glass: 5 mm heat tempered, impact resistant glass, fitted over silicone gasket. Electrical connection: A three way 15 amp connector block is provided in the gear compartment. Silicone covered cabtire is used between gearbox and lampholder. All internal wiring 1mm silicone covered. Reflector system: High purity aluminium, anodized and chemically brightened used in both versions. Wide beam uses dimpled material with a maximum intensity of 650 - 725 cd/klm. Medium beam uses smooth material with a maximum intensity of 925 - 1050 cd/klm. Beam spreads are symmetrical and vary slightly between different lamp types. Mounting: Standard fitting with stirrup bracket is suitable for mounting to a wall or frame. Non integral versions are available where the control gear is not attached to the head piece. Windage area: 0.125m2