black
100
14
17.3
E-pof-14
black
100
12
14
E-pof-12
black
100
11
14
E-pof-11
black
100
10
13
E-pof-10
black
100
8
11
E-pof-8
black
100
6
8.6
E-pof-6
black
100
5
7
E-pof-5
black
100
3
4.5
E-pof-3
black
100
2.5
4
E-pof-2.5
black
100
2
3
E-pof-2
Color
Length(m/rl)
Outer Dia (mm)
Inner Dia (mm)
Model
PVC end solid core fiber optics light cable
- Specification:
Replacing conventional lights
Piping sunlight
- Alternative lighting for:
Grain elevators
Welding and spray painting areas
Ammunition bunkers
Roadside repair sites
Utility pits and manholes
Swimming pools and spas
Mine shafts and tunnels
Non conductive lighting for spark free or electricity free areas:
Electronics and printed circuit board technicians
Hobbyists such as bird and plant breeders
Jewellers and watchmakers
Refrigeration and air conditioning technicians
Plumbers
Auto mechanics
Medical and dental professionals
- Inspection lighting for:
Highlighting building features
Precious artifact lighting
Cabinets and ornamental furniture
Chandeliers
Aquariums
Landscaping along driveways and gardens
Trade shows and exhibitions
Ice sculptures and art pieces
Christmas exhibits
Shop front window displays
Signage
Phone booths and bus shelters
Automobiles, buses and trucks
Stairs and escalators
Building foyers and corridors
Casinos
Discos and nightclubs
Shopping centre arcades
- Decorative lighting for:
Step and aisle marking
Refrigeration and cold rooms
Heliport pads and airport approaches
Industrial areas
Boat lighting
Marina berths
Traffic and directional signals
Accident and emergency scenes
Danger areas involved with road construction
Utility work areas at night
Emergency exits or pathways
Hazardous or explosive areas
- Safety lighting for:
Because of its unique properties, Optic Solid Core Fibre can be used for a variety of applications:
Fibre optic lighting may be used to create innovative effects by emphasizing architectural and landscaped features with lines and points of coloured light.
In situations where traditional lighting is dangerous or difficult to install (eg. lighting the interior of fuel tanks for repair purposes), Poly Optic Solid Core Fibre Optics presents an electricity/spark free work light and is completely safe because the light driver is carefully located outside the volatile area.
Optic Solid Core Fibre Optic lighting does not emit any kind of magnetic field and does not transmit harmful ultraviolet or infrared light. The light transmitted is completely harmless because harmful wave lengths of light are filtered at a suitable illuminator. Solid Core Fibre Optic presents an effective alternative to the hazards or inconsistencies presented by traditional lighting.
Traditional lighting fixtures are installed in the cavities of building structures where heat dissipation and fire are always a concern. Since fibre optic lighting uses electricity only at the point of illumination and not within ceilings, walls or other confined areas, it is exempt from many codes and requirements. Therefore Optic Solid Core Fibre Optic can be placed into areas often difficult to access.
Before the use of fibre optics in lighting, there were limited traditional lighting techniques and very few choices. Fluorescent fixtures, incandescent lights and a few specialty (low voltage) lights, made up the range of products. This was particularly true in unusual and difficult lighting situations, such as in volatile environments, or for simple tasks, such as pool and fountain lighting or changing the colour of a light.
Many fibres can be powered from a single light driver typically 50 to 150 watts. The Optic Light Driver TM Series can be used to change colour sequences or patterns using a variable speed or stepped change colour wheel.
The core of the fibre is made from a flexible polymerised gel. The gel is clad in an outer layer of Teflon. The optic is powered from a light source and carries only light waves in the visible light spectrum. Light is transmitted along the core/cladding interface due to a phenomena called total internal reflection.
Solid core optical fibre is produced using state-of-the-art production techniques to achieve both high quality and economy of price.
Solid core optical fibre can be utilized for end light, where point light is desired or side light, where decorative linear effects are desired.
Led optic fiber lighting decoration
Payment Terms: | T/T,Western Union,bank transfer |
Specially tailored for Musical Fountains, Himalaya Professional Fountain LED can light fountain nozzles evenly with high efficiency. (the light can easily track and light water columns to 30-meter high). Equipped with 3-color chips in each Bulb and controlled by Himalaya ...
Come From Changsha Himalaya Music Fountain Equipment Co., Ltd
The high reflectivity of the mirror reflective aluminum sheet is determined by the special structure of its surface. The surface of the mirror reflective aluminum sheet is polished to form a very smooth mirror surface. When light shines on the surface of the aluminum sheet, ...
Come From Henan Hongchang Aluminum Co., Ltd.
Portable IPL Machine A new method of hair removal and skin rejuvenation - intense pulsed light with virtually no side effects and no pain, this technology offers a faster, more comfortable and safer treatment than other lasers. Equipped with three modes, IPL portable, super ...
Come From Beijing Nubway S&T Co., Ltd.