Placement of a solar light is all-important. For maximum solar gain, the solar cell should face due south and be positioned on an angle so it is perpendicular to the sun. The surface of the solar cell should not be shaded by foliage or structures at any time during the day. If the light has an automatic on-off sensor, it should not be placed near any other bright light source, such as a street lamp, because it may cause the light to shut off prematurely.
Getting the Most Out of an Outdoor Solar Light
Solar lights have either a manual on-off switch or a photo resister that turns the light on when the sun sets and off when it gets light again.
Housing: Whether a solar light is strictly functional or highly decorative, its housing needs to be UV-stable and weather tight. Assembly should be minimal. In most cases, the solar panel will be an integral part of the light itself. Sometimes the solar panel is separate, which allows you to mount the light where you need it, and then mount the panel where it will get the best sun exposure.
Run Time: The quality and integration of the components described above determines how many hours the light will shine. Run times can be as short as an hour or as long as a few days.
Circuitry: This is the most crucial component of a solar light, and the one that most often separates the good solar lights from the bad. Wiring determines how efficiently the stored electricity is converted into light. High-quality circuitry will give you a longer-lasting, brighter solar light.
Sometimes manufacturers of solar lights increase brightness by combining LEDs with a small halogen bulb. But as LED technology improves, most manufacturers are shifting away from halogen in favor of all-LED solutions. The only exception is solar security lights, which still require the extra light intensity provided by halogen bulbs.
LED: "Light-emitting diodes" are like miniature light bulbs that are installed in-line on an electrical circuit. The light emitted by an LED bulb is the byproduct of electrons moving through a semi-conductor material. Since there's no need for a filament, these bulbs last a very long time and also do not generate waste heat. The standard runtime of most LEDs is upwards of 100,000 hours, while an incandescent bulb usually lasts for about 3,000 hours. LEDs can be wired in clusters to intensify the light output.
Battery: The solar cells are wired directly to a re-chargeable battery that stores the electricity generated by the cell. A diode located between the cell and the battery ensures that electricity flows only one way: into the battery. NiMH batteries are often used because they stand up better to the frequent charge and release cycles than standard NiCAD batteries. NiMH batteries also have a significant environmental benefit. They can be disposed of without harm to the environment. The battery is usually the second most costly component of a solar light.
Solar Panel: The solar panel has a photovoltaic cell inside, which converts sunlight to an electrical current. A solar panel's effectiveness depends on the size and quality of the solar cell and the transparency of the protective cover. The solar cell itself is usually the most expensive part of a solar light. As photovoltaic technology advances, prices are gradually coming down.
The technology for outdoor solar lighting is improving rapidly. Solar lights are looking more attractive, shining more brightly, and their run-time is getting longer. To give you a better sense of how these lights work and how to select a good one, here are the basic components:
It's not hard to see why is all the rage. Of course it's great that you don't have to pay for electricity, but more important for most folks is the fact that you don't need to install any wiring.
Take the light out of the box, put it beside your walkway or in your garden, and you're done. Because most solar lights have a built-in darkness sensor, you don't even need to think about turning
them on and off.
All About Solar Lights
New floating lamp can be put on water or hanged
Plastic Solar Lamp
Dimension:17x17x17cm
2 * super bright LED/ White/RBG/Blue
1 * solar rechangable "AA" size
600 mA Ni-CD battery included
Operationg hours: 6-8 hours
Certificate: CE & RoHS
solar floating light
New floating lamp can be put on water or hanged
Dimension:17x17x17cm
Delivery Time: | 10-40DAYS |
Package: | foam and carton |
Supply Ability: | 5000 Piece/Pieces per Month |
Minimum Order Quantity: | 500 Piece/Pieces |
Payment Terms: | L/C,T/T,Western Union |
Port: | NINGBO/SHANGHAI |
Fob Price: | US$15-25NINGBO/SHANGHAI |
Certificate: | CE & RoHS |
Color of LED: | White |
COLOUR: | BLACK |
Protection Level: | IP65 |
Light Type: | LED |
Model Number: | AL005 |
Brand Name: | JUSTOP |
Place of Origin: | Zhejiang China (Mainland) |
AN-SLA series is the latest solar street light model independently developed by Anern. This series of China solar light adopts the most popular all-in-one design, being customized with a new appearance design. Its biggest difference from the traditional integrated solar street ...
Greenshine commercial solar LED street lights provide high intensity lighting at night while consuming no electricity. These fantastic solar street lamps for sale are extremely cost-effective, best for enhancing safety, easy to install, and require no monthly fees for ...
Usage of solar led street lights have increased in popularity over the last decade for many reasons. Solar led street lights can be installed in any location with direct view of the sun, eliminating the need for electric power and meter electric bills associated with it. Second ...