LED Light BULB

The Lamp will AUTO CHARGE when it is properly installed into the socket. RED LED Indicator is on Representing the lamp is in charging stage . Please continuosly charge the lamp for more than 24 hours before the first usage .

Special FUNCTION: When the Lamp is properly installed into the socket and there is power supply . the RED led indicator will be on . Turn off the power and wait for 2 seconds then trun it on again . the lamp will light up . IF THE POWER WAS CUT OFF at this stage for 5 seconds and then turn it on again , the light will become OFF  .

When power was cut off : PRESS the Switch can control the on and off of the light

When the module is charging : Steadily press the touch sensitive switch can light up the lamp . the RED LED Indicator is off at this stage . when remove the finger from the touch sensitive switch . the RED LED indicator is on

Function of Touch Sensitive Switch :

ALL PRODUCTS AREE DESIGN and MANUFACTURE IN TAIWAN

When properly installed into the E27 socket , the E27 emergency light can be controlled by the wall switch to function as additional lighting or nigh lighting .

Comply with ROHS Standard

Can be use as a FLASHLIGHT  with Touch sensitive switch to control the on/off of the light.

HIGH QUALITY LIGHTING Fixture with Classic , Elegant and Brand new design .

ULTRA Bright white LED , Low Power consumption , Energy saving.

E27 LED Emergency Light Bulb
High Quality Lighting Fixture with Classic .elegant . Touch me not
can be used as a flashlight