power save Lamps

Benefits

We offer 4 sizes and custom sizes as well:

10kva or 12amps 3-phase 480 volt

15kva or 18amps 3-phase 480 volt

25kva or 30amps 3-phase 480 volt

50kva or 60amps 3-phase 480 volt

The Power-Save HID Light Manager works in conjunction with other energy savings devices such as high efficiency lamps, photoelectric switches, and other energy management systems. Down-line switching capability is also an available option. Additionally, running the lamps at a lower wattage will reduce the operating temperature, this prolonging the life of the lamps and the ballasts by up to 40%. The Power-Save HID Light Manager controls spikes, controls and regulates line voltage to induce savings and also prevents over-voltage situations, which are a major cause of premature lighting system failure.

The Power-Save HID Light Manager controls any ballast-based, gaseous discharge lighting system. This includes Mercury Vapor, Metal Halide, High and Low Pressure Sodium. Its flexible design allows The Power-Save HID Light Manager to interface with any dedicated lighting circuit of 480 volts in capacities of 10 to 100 amperes three phase. One unit can reduce the energy consumption of one, ten, 100 or even 400 lighting fixtures and the savings can be measured within 20 minutes after the lights turn on!

The Power-Save HID Light Manager

SAVE UP TO 35% ON YOUR electric lighting expense with the Power-Save HID Light Manager AND the Power-Save FLUORESCENT Light Manager

Both units are in NEMA 3 rated 7 X 7 X 8 enclosures

Either unit will work in a 208/480 environment

When installing the 3400 use a 40 amp three pole breaker

When installing the 3200 use a 30 amp three pole breaker

The PU 3400 is rated for a 400 amp inductive load

The PU 3200 is rated for a 200 amp inductive load

Weight w/ packaging is 10.1 lbs.

EMI / RFI Noise Reduction 0-40dB

Six-Way Electrical Protection

Load Rating 20A (this means it discharges up to 20 amps at a time)

Let Through Voltage 150V line-to-neutral

Typical Protection For : Electrical Storms, Lightning Activity and Power Utility Spikes

Surge Suppression 2000 Joules

20 Year Design Life

Utilizes Self-Healing Low Loss Capacitors

Three Phase

Specifications:

Voltage Regulation

Power Factor Optimization

Electrical Noise Reduction

Features:

Reduces harmful effects caused by electrical noise in the electrical system

Eliminates danger of harmful power surges on appliances and sensitive electronic equipment

Enhances capacity of existing electrical system

Reduces electricity required by existing inductive loads

Benefits:

                 Three Phase Now Available      

All units connect to your circuit breaker box. Installation time about 1/2 hour.

Return on investment for the 3 phase could be just several months. Great for HVAC.

Residential customers throughout North America should see a realized savings of 8% - 10% minimum and as much as 25% on their electrical usage (and thus power bills). All Power-Save products are backed by a warranty for surge and lighting protection.

The Power-Save 1200 was designed with the homeowner in mind, providing lower energy bills, increased motor and appliance life, as well as surge and lightning protection for all of the equipment inside of your house. Everyone who has an electric bill should have a Power-Save 1200!

This little box can save you 25% on your electric bills.
Imagine a small gray box that fits neatly next to your breaker panel, saves you hundreds, if not thousands, of dollars year after year and protects the entire home. Sound too good to be true?