Bright Round Bars

Ambica is one of the largest producers of Bright Bars in India. The production range includes Rounds, Squares & Hexagons up to 15,000 tons per annum. The detailed supply specifications are as following Size Range 4 mm 120 mm (3/16 inch 4.1/2 inch) Diameter Tolerancesh9, h10, h11, f9, f10, f11, f12, k10, k11, k12 as per DIN 671 / DIN 10278 ASTM A 484 DIN 1013 End Finish Faced / Sawed one sided or both sided Chamfered Ends (30, 45, 60 Degrees) one sided or both sided, as per the requirement Special Delivery Conditions (available on request)Very Fine Diameter Tolerances e7, g7, h7, f7, h8, f8, e8, g8 Length Tolerances of 0, +10 mm (0, +0.5 inch) Surface Finish up to Ra value 0.2 ?m (12 RMS) 240 320 Grit Polished Straightness up to 0.5 mm per meter TIR Centered Bar Ends 90 Degrees Packing of BarsBefore the highly finished bars are carefully packed, each length of bar goes through the following processes Both ends are Color-coded, as per the customers requirements Ends of Bars above 30 mm are hard stamped / punched with the Heat Number and the Grade of the material Each bar is thoroughly cleaned to remove the oil or grease from the surface (only in Austenitic steels) A range of Plastic rings (depending on the length of the bars) are inserted in each bar to avoid rod to rod contact To preserve the defect free surface of the bars during transportation and handling, these bars are then coupled with Signode-straps, and wrapped in Low Density Plastic Sheets. The bundles are then again wrapped with the High Density Bio-degradable / Recyclable Laminated Sheets, for complete security of the shining bars.Wooden boxes are also provided upon requestBundle Weight varies from 250 kgs upto 1,500 kgs, as per the customers requirement.

h9, h10, h11, f9, f10, f11, f12, k10, k11, k12 as per DIN 671 / DIN 10278