Hard Stainless Steel Wire

SPRING WIRESKEl's Stainless Steel Wire for Springs are manufactured having excellent mechanical properties (surface, cast & helix) manufactured under strict guidance of technical people, diameter from 0.19 mm to 1.20 mm in bright finish and 0.50 mm to 6.0 mm in matte finish (coated) in grade of AISI 302, 304 & 316, 321, Standard ASTM A313 and others.ROPE WIRESKEl's Stainless Steel Wire for wire rope are manufactured having excellent mechanical properties, under strict guidance of technical people, diameter from 0.19 mm to 1.20 mm in bright finish and 0.50 mm to 6.00 mm in matte finish (decoated) in grade of AIS1304, 316,321 rope specs.Stainless Steel Wire for springs has following Characteristics:Note:Other tensile grades may be used on agreement between the manufacturer and the supplier.Reverse bend strengthThis test applies only to wire of nominal diameter between 0.5 mm inclusive ad 3.7 mm inclusive. For wires of nominal diameter less than 0.5 mm.The wire shall withstand without breaking the minimum number of reverse bends specified in table 3 for the appropriate diameter, tensile grade and finish. The radius of curvature of the supports for the various wire diameters is also given.If the tensile grade of a wire lies between two tensile grades given in table 3, then the number of reverse bends for the next upper tensile grade shall be chosen.Note:The reverse bend test is not mandatory for wires to correspond with this international standard.CAST & HELIX (PITCH)

SPRING WIRESKEl's Stainless Steel Wire for Springs are manufactured having excellent mechanical properties (surface, cast & hel