Hard Stainless Steel Wire
Product Details
Coil Wt and coil dia for hard wires
| Dia(mm) | Dia of Block (mm) | Cast | Helix (Pitch) (mm) | |
| Cast PITCH OR HELIX | 0.80-1.00 | 300 | 300-450 | 90 under |
| 1.00-1.60 | 400 | 400-600 | 100 under | |
| 1.60-5.50 | 600 | 600-900 | 100 under | |
| 5.00-8.00 | 750 | 750-1125 | 100 under |
PACKING
CAST & HELIX (PITCH)
Note: The reverse bend test is not mandatory for wires to correspond with this international standard.
If the tensile grade of a wire lies between two tensile grades given in table 3, then the number of reverse bends for the next upper tensile grade shall be chosen.
The wire shall withstand without breaking the minimum number of reverse bends specified in table 3 for the appropriate diameter, tensile grade and finish. The radius of curvature of the supports for the various wire diameters is also given.
This test applies only to wire of nominal diameter between 0.5 mm inclusive ad 3.7 mm inclusive. For wires of nominal diameter less than 0.5 mm.
Reverse bend strength
| Table 2 - Tolerances on tensile grade | |
| Nominal dia of wire d | Tolerance on tensile grade |
| mm | N/mm2 |
| 0.2 < d < 0.5 | 390 |
| 0.5 < d < 1 | 350 |
| 1 < d < 1.5 | 320 |
| 1.5 < d < 2 | 290 |
| 2 | 260 |
Note: Other tensile grades may be used on agreement between the manufacturer and the supplier.
These nominal values are the lower limits of strength. The upper limits are equal to the lower limits in addition to the tolerance specified in table 2.
The tensile grades of wires are:
| Table 1 - Tolerances on diameter | |
| Nominal Dia of wire d | Tolerance on diameter |
| 0.2 <d < 0.4 | +/-0.01 |
| 0.4 < d < 0.6 | +/-0.015 |
| 0.8 < d < 1 | +/-0.02 |
| 1 < d < .6 | +/-0.02 |
| 1.6 < d < 2.4 | +/-0.03 |
| 2.4 < d < 3.7 | +/-0.03 |
| 3.7 < d < 5.2 | +/-0.04 |
| 5.2 < d < 6 | +/-0.05 |
| values in millimetres |
Tensile grades
The arithmetic difference between the two measurements of the diameter shall be not more than half the tolerance specified in table 1.
Ovality of the wire
Stainless Steel wire for spring is made from the selected steel. In particular to provide optimum spring efficiency, this type of wire is painstakingly finished to eliminate flaws.
Stainless Steel Wire for springs has following Characteristics:
KEl's Stainless Steel Wire for wire rope are manufactured having excellent mechanical properties, under strict guidance of technical people, diameter from 0.19 mm to 1.20 mm in bright finish and 0.50 mm to 6.00 mm in matte finish (decoated) in grade of AIS1304, 316,321 rope specs.
ROPE WIRES
KEl's Stainless Steel Wire for Springs are manufactured having excellent mechanical properties (surface, cast & helix) manufactured under strict guidance of technical people, diameter from 0.19 mm to 1.20 mm in bright finish and 0.50 mm to 6.0 mm in matte finish (coated) in grade of AISI 302, 304 & 316, 321, Standard ASTM A313 and others.
KEl's Stainless Steel Wire for Springs are manufactured having excellent mechanical properties
- Grade:300 Series
- Standard:ASTM
Send inquiry / quota request to Hard Stainless Steel Wire
Relate products of Hard Stainless Steel Wire
Our insulated stainless-steel wine carafe holds a whole bottle of wine and keeps it chilled for hours. Elegant as a wine decanter or water carafe at a dinner party, fun for keeping wine by the pool and perfect for toting to your next BYOD party. ...
Come From SnowFox
Product Name: Nickel Alloy Wire, Stainless Steel Wire Shape: Round, Square, Flat, Hexagonal etc. Standard: GB, AISI, ASTM, DIN, EN, JIS Process: Hot Rolled, Cold Rolled, Forged Size: Can Be Customized Inspection: TUV, BV, ABS, LR etc. Payment: TT, LC, OA, DP, Alibaba Trade ...
Come From Allianz Steel Group
Product Name: Nickel Alloy Fittings, Stainless Steel Fittings Standard: GB, AISI, ASTM, DIN, EN, JIS Size: Can Be Customized Packing: Waterproof Polybag, Wooden Box Inspection: TUV, BV, ABS, LR etc. Payment: TT, LC, OA, DP, Alibaba Trade Assurance, Bank Garantee etc. ...
Come From Allianz Steel Group
