abrasion (erosion)resistant steel pipe
Product Details
4. bimetal abrasion resistant steel pipes lined with a layer of high chromium alloy iron by centrifugal casting process are used for coal fired power plant, steel and iron metallurgy plant,cement plant,coal washing & selecting plant and so on.
3. Dual wall pipe thoroughly resolves the problem that hardening layer pipes happen to rupture and blows out .With special treatment, their service life are remarkbly prolonged , and can be up to 50000-80000 M3 averagely. The dual wall pipe has the advantage of safety, longer work life, energy saving, continuum, low maintenance.
2. Inner hardened pipe are used for concrete pumping.High frequency and heat treatment process makes the inner wall to be high intensity(HRC 55-62) and highly abrasion resistant layer(1.8mm), and leaves the outer wall with high plasticity and strength to avoid bursting.The concrete conveyer pipes can endure more impact and abrasion from the aggregate, such as screes, gravels and granite; and improve the resistant abrasion ability and the average service life can reach 25,000 to 30,000 cubic meter of concrete
1. steel-corundum ceramic composite pipe for thermol power plant, cement plant, aluminum factory, iron & steel works , mining, metaullurg industry, etc.
wear resisting pipe
wear resisting pipe of conveying pulvarised coal ,fly ash,mine dust,metallurgy slag ,sand,and concrete,etc.
- Secondary Or Not:Is Secondary
- Alloy Or Not:Is Alloy
- Place of Origin:China (Mainland)
- Country:China (Mainland)
- telephone:86-379-64615386
| Secondary Or Not: | Is Secondary |
| Alloy Or Not: | Is Alloy |
| Place of Origin: | China (Mainland) |
Send inquiry / quota request to abrasion (erosion)resistant steel pipe
Relate products of abrasion (erosion)resistant steel pipe
Wear resistant cast basalt stone lined steel pipe is composed by lined with cast basalt pipe, outside steel pipe and cement mortar filling between the two layers. It combines the advantages of cast basalt and steel pipe, wear resistance, corrosion resistance, ...
Come From Sunny Steel Enterprise Ltd.
High-strength low-alloy rare earth wear-resistant steel pipes are suitable for blast furnace investigation in steel mills, coal grinding systems in power plant boilers, coal transportation, powder feeding, dust removal systems, slag removal, coal washing pipelines and chutes in ...
Come From Sunny Steel Enterprise Ltd.
GB/T 24186 NM500 abrasion resistant steel plates are high strength steel with high wear resistance. The Brinell hardness value of NM500 steel is 500 HBW. NM500 steel is mainly used to provide protection for wear-resistant occasions or parts. At the same time, NM500 abrasion ...
Come From Henan Bebon Iron & Steel Co., Ltd
As the conventional refractory linings of rotary kiln in nonferrous metal industry are brick-relined ,after 3 months service some bricks would be displaced,and it is very difficult to patch the joint between new bricks and old bricks. In order to solve this kind of problem, PRCO ...
Come From HENAN ZHONGNAI CO.,LTD
Spring Steel Screen Mesh for Vibrating and Crusher Screens Description Spring steel vibrating screen mesh is made of high carbon steel wire and medium carbon steel wire. Similar to the manganese steel vibrating screen mesh, spring steel screen mesh have different hole types, ...
Come From First Vibrating Screen Mesh Company
Typical Analysis, % C 0.21, Cr 1.30, Mo 0.15, Ni 0.20 P 0.015, S 0.010 Supplied Condition Hardness: 340-400 BHN Stock Range Plate: Thk: 3 - 5mm Size: 1500 x 3000mm ...
Typical Analysis, % C 0.30, Si 0.50, Mn 1.80, Cr 1.00, Mo 0.50, Ni 0.80V 0.08, P 0.025, S 0.010, Nb 0.05, B 0.005 Supplied Condition Hardness: 450-550 BHN Stock Range Plate: Thk: 10 - 50mm ...
Typical Analysis, % C 0.20, Si 0.50, Mn 1.80, Cr 1.00, Mo 0.30, Ni 0.80V 0.08, P 0.025, S 0.025, Nb 0.05, B 0.005 Supplied Condition Hardness: 360-440 BHN Characteristics& Applications Used where high resistance to wear is required. Very good weldability. Good machinability. ...
Typical Analysis, % C 0.30, Si 0.50, Mn 1.80, Cr 1.00, Mo 0.50, Ni 0.80V 0.08, P 0.025, S 0.010, Nb 0.05, B 0.005 Supplied Condition Hardness: 450-550 BHN Stock Range Plate: Thk: 10 - 50mm Sizes: 5' x 10' and 5' x 20' ...
