Cast Iron Products

BENCH CENTRE The base is made of close grained Cast Iron, heavily ribbed and stress relieved. The checking centres consist of head stock and tail stock. Head stock spindle is made up of Nickel-Chromium Steel, case hardened and ground. Centres are made up of tool steel and ground.

STRAIGHT EDGE I-Section straight edges are designed for maximum stability. Weight is optimized.

BOX ANGLE PLATE T-Slots are provided on working surface. T-Slot dimensions as per IS2013:1962 Standard. Accuracy as perIS6232:1971 Standard.

ANGLE PLATE The plates are well ribbed to minimize distortion. Suitable number of T-Slots are provided on surface.Divided clamping holes are provided on other working face. Accuracy as perIS2554:1971 Standard.

CI SURFACE PLATE The plates are ribbed to minimize deflection under load to conform to deflection limits as perIS2285:1963 standard. Grade 1 plates are artificially seasoned. Accuracies as per IS2285:1963 Standard

PRODUCT RANGE:

Cast Iron Products are manufactured at our well equipped 30,000 sq. ft. foundry located at SIPCOT, Hosur. A machine shop and laboratory spread over a 10,000sq. ft. area are also available at this facility.

The Cast Iron products are made of close grain Cast Iron with hardness from 190 to 210 BHN.Two grades available: Grade I - Hand