Floor Builder System

The Triad Floor Builder System is designed to be a state-of-the-art single-table floor system. The system accommodates 2" x 8" - 2" x 12" dimensional lumber, floor trusses, and I-joists either width or length-wise within the table. The system includes a framing table, material bridge, and nailing/decking bridge which can be out-fitted with either nails or screws. The table can jig decks up to 16' in length or tables can be built in 16' increments from the base size up to 80' in length. Decks can be framed up to 16' in width (custom sizes are available upon request). BRIDGE SPECIFICATIONS: Bridge Widths: 9' 2" to 16' 2". Standard Hand Crank Control for Bridge Movement. Push Button Controls located on Bridge Control Panel. Optional Joystick Control for bridge drive, tool firing and tool shift. Optional Automatic Bridge Return. Optional Laser Pointer for positioning the Bridge at stud and component locations. Nail guns mounted standard for deck fastening (Optional mounting of screw guns) Tool Bar #1: Decking guns mounted standard 12' on center shift to 6" on center (optional oc spacing available) Tool Bar #2: Manually adjustable decking gun spacing (for decks built length of table) Optional Rim Fire at 6" on center to fasten decking to top and bottom rim Three pneumatic nailing tools on each side of the bridge for framing 2" x 8", 2" x 10", and 2" x 12" joists. Four nails are fired in 2" x 8" floors, five into 2" x 10" floors, and into 2" x 12" floors. Down clamping pads are designed to clamp and flush the joists to the rims. Clamping pressure is 314 lbs. and activates simultaneously with tool firing activation. Clamp senses 2" x 8", 2" x 10" or 2" x 12" joists for automatic setting of nail pattern. Bridge Widths of 9'2" to 16'2" Ro-Cat