Multi-layered sintered wire mesh

Example of use
Liquid filters, Oil filters, Degas filters, Polymer filters, Steam filters, Low pressure drop (high permeation) filters, Nutsche filters, In-line strainers, Temporary strainers, Flame arrestor, Bridge breaker for powder, Air roll, Centrifugal separator, Column for chromatography, Pleated candle filters, Cartridge filters, Exhaust gas filters (DOC, DPF) for diesel and gasoline engine, Oil mist filters, Oil mist separator, Natural gas filters (LNG), Carbon catcher, Filling nozzle for pure water, Air filters, Oil filtration for coolant, Pre-filters, Grease filters for kitchen, Duct filters, Thermal storage material (fuel cell stack), Regenerator (stirling engine), Cross flow filters, Breaker plate, Filters for rockets (LOXLH2), Last filters of discharge port

Filters and Housing
Design and manufacturing of various filters and filter housing are available.

Various materials are available
We mainly manufacture sintered wire mesh of SUS316 or SUS316L. However, we are able to offer such material as SUS304 or other stainless steel, Hastelloy, Alloy20, Inconel, Monel, etc.

Custom made
Single mesh or mesh combination+perforated SUS plate
Mesh combination+SUS Plate, SUS plate+SUS plate

Pore-Flo (2-3 layres sintered wire mesh)
12/64+12/64 (Pore-Flo)

Bonmesh (several layers sintered wire mesh+perforated metal)
Mesh construction upon customer's request

Standard : Poremet, Bonmesh and Pore-Flo
Poremet (5 layers sintered wire mesh)
100+fine mesh+100+12/64+12/64 (Poremet)
100+fine mesh+100+12/64+12/64+12 (Special Poremet)

Mesh construction (combination)
We have various sintered wire mesh construction such as standard and custom made products which we will arange mesh construction upon customer's requests.
Our typical standard, ''Poremet'' is five (5) layers sintered wire mesh of stainless steel
(SUS/AISI316 or SUS316L).

Line of Products
Various sizes are available
We are able to offer various sizes of sintered wire mesh upon customer's request up to the maximum size, 1200 x 1200mm and our standard sizes are as follows;
1200 x 1200mm, 1000 x 1000mm and 500 x 1000mm

Features
Weldability, Easily fabricated, Durability, Heat resistance, High pressure-resistance, Washability, Filtration and Separation, Uniform aperture size

What's Multi-layered sintered wire mesh?
It is porous metal plate that Multi-layered wire mesh are bonded at every point of contact by sintering (diffusion bonding).

PRODUCTS

Competitiveness
Since we have eight (8) units of advanced vacuum furnaces, our prices and delivery which we offer would be quite competitive. Your inquiry or request of quotation will be welcome.

Large scale of manufacturing capacity
For sintering, we have four (4) vacuum furnaces in Kyoto, Japan and also four (4) in Thailand to serve our customers in Japan, Europe, Korea, China, Taiwan, Singapore, etc.

What's Nichidai Filter
Rich experience
We started sintering stainless steel wire mesh in early 1970's with an electrical vacuum furnace. Since then, we have been manufacturing the said products over 30 years. And we are now a leading and quality-oriented company and the largest supplier of sintered wire mesh in Japan.

We Nichidai Filter Corporation are manufacturer and exporter of Multi-layered sintered wire mesh.We have been developing and manufacturing of Multi-layered sintered wire mesh filters based on our unique sintering technology over 30 years.

Manufacturer and Exporter of Multi-layered sintered wire mesh in Japan and Thailand