Wire Mesh

Our company manufactures the vertical wire mesh weaving machines (the galvanized hexagonal wire mesh weaving machine) of model gll(t) and model lnwl. There are mainly two types: The light-duty and the heavy-duty. Model gll(t) is a light series of mesh weaving machines, including 7 different types of machines, I. E.1/2,5/8,3/4,1,11/4,11/2,2, with which the galvanized hexagonal wire mesh of different apertures can be woven. The maximum diameter of the wire that can be woven on this type of machine is 1.2mm. This series of product include two types of machines, I. E. The single-head and the double-head machine. The maximum weaving breadth of the single-head machine is 1.2m and that of the double-head machine is 2.2m. Separated from the middle, the double-head machine can weave two 1-meter wide meshes simultaneously. Refer to table I. Type 1/2 and type 3/4 machine can weave trapezoidal wire-mesh after necessary refitting. Refer to table II. This kind of wire-mesh is widely used as the skeleton of the asbestos shingle. Model cnwl is a heavy series of mesh weaving machines. It is a novel type of wire-mesh weaving machine developed under the operating principle of the light series of mesh weaving machines of China and according to the advanced experience of other countries. It is a kind of galvanized hexagonal wire-mesh weaving machine, which can weave wire with major diameter into wire-mesh with wide breadth. Both the mesh-weaving machine and its galvanized hexagonal wire mesh supply a gap in China. This mesh-weaving machine includes the following series:60*80,88*100,100*120, etc. Its maximum weaving breadth is 2.3-4.3m. The special type of mesh-weaving machine can be built to the customers order. The maximum wire-diameter for this machine is 3mm.