Performance as follows:
1. Good performance of alkaline-resistance
2. High tensile strength and deformation-resistance
3. Excellent self-adhesive performance
4. Simple and easy to be applied
Application
Repair the crack and joints or holes of drywall, plasterboard, stucco; And repair other damages in other wall surface.
Specifications and packing for fiberglass self-adhesive tape:
1) Mesh size: 2.85 x 2.85mm (9 x 9 mesh), 3.2 x 3.2mm (8 x 8 mesh)
2) Weave: Leno
3) Width: 50mm, 100mm, 150mm, 200mm, 1000mm, 1200mm, 1500mm, etc.
4) Length of roll: 20 m to 900m, Any demand length is available, or according to client requirements
5) Colors available: White, yellow, grey, silver, blue, black, etc.
6) Main size: 50mm x 90m, 50mm x 45m, 50mm x 20m, 50mm x 153m
7) Packing: Inner packing: Shrink packing or plastic bag,
Outer packing: 24 rolls or 54 rolls or 72 rolls/carton or pallet packing
Applications of fiberglass self-adhesive tape:
1. Wall must be clean and dry
2. Center and apply tape over the length of the joint, pressing firmly
3. Apply a generous first coat of compound over the and through the mesh, making sure to completely fill the joint crevice. When the joint has been completely filled, wipe off any excess compound
with the drywall knife leaving enough to cover the tape.
4. Let dry completely, then sand slightly.
5. Apply sufficient thin finishing coats to produce a smooth wall surface.
6. Cut or butted boards do not have a tapered edge. Therefore, special
Care must be taken to assure proper compound penetration of all joints. This may result in slight build-up of compound that will require an increased amount of edge feathering.
Caution
1. Failure to completely fill the joint may result in cracking.
2. For best results, use a setting-type compound.
Slitted Size:Width 5cm,10cm,15cm, 20cm, or wider. Length:10cm,20cm,45cm,90cm, or longer.
Gram weight: 55-80g/sq.m
Specification:8*6,8*8,9*8,9*9 mesh/inch etc(mainly C-Glass Leno Weave)
Characteristics:Excellent alkali resistance,high tensile strength and deformation-resistance, perfect chemical stability, wonderful self-adjesove and well locativeness,very easy to be applied and can be used for long time
Application:Repair dry wall, join plaster board and repair cracks and other damage in other wall surfaces, it is an ideal and necessary material for inside wall repairing and decoration of modern building.
fiberglass self adhesive tape
fiberglass self adhesive tape
high tensile strength and deformation-resistance, perfect chemical stability
try adhesive tape to get through more products
Delivery Time: | one 20GP within one week |
Package: | carton |
Supply Ability: | 30000 Meter per Day |
Minimum Order Quantity: | 5000 Square Meter |
Payment Terms: | L/C,T/T |
Port: | xingang,tianjin,china |
colour: | white red yellow etc |
Brand Name: | tianbo |
Place of Origin: | China (Mainland) |
Aluminum foil rubber tape are single-faced adhesive tape of Aluminum Foil backing which is coated by Synthetic rubber resin adhesive (PSA) with Liner.Aluminum foil rubber tape is industrially manufactured, and thus can be manipulated based on the selection of the monomers used ...
Come From Adhesive Tape Manufacturer in China
Aluminum foil rubber tape are single-faced adhesive tape of Aluminum Foil backing which is coated by Synthetic rubber resin adhesive (PSA) with Liner.Aluminum foil rubber tape is industrially manufactured, and thus can be manipulated based on the selection of the monomers used ...
Come From Adhesive Tape Manufacturer in China
Aluminum foil rubber tape are single-faced adhesive tape of Aluminum Foil backing which is coated by Synthetic rubber resin adhesive (PSA) with Liner.Aluminum foil rubber tape is industrially manufactured, and thus can be manipulated based on the selection of the monomers used ...
Come From Adhesive Tape Manufacturer in China