1. Fiberglass needled mat is a filter material which has a reasonable structure and can bear high temperature. It not only has the excellent merit such as heat-isolation, anti-corrosion,
stable-size, minimum elongated shrinkage, high intensity;
But also the textile fiber of mat layer assumes the single textile fiber, three dimensional pore structure, the hole rate is high, filtering the resistance to the air small, is a kind of high speed
and high effective of heat filter material.
Compares with other thermostable chemical fiber felt, has the special merit such as below-price and more high heat-resistant and so on. But its movement resistance must be higher than the common
chemical fiber high-temperature filter material,
Filtering the precision slightly low.
2. Fiberglass needled mat, can be applicable to each industry dry kiln to heat haze filter, such as chemical industry, steel, metallurgy, carbon, electricity generation, cement and so on.
3. It also can be applicable to the pure ash of pulse and higher soon anti- blow the pure ash and other various kind of bag type dust remover.
1. Fiberglass needled mat is a filter material which has a reasonable structure and can bear high te
Payment Terms: | L/C,D/P,Western Union |
Fiberglass Type: | E-Glass |
Mat Type: | Stitch Bonding Chop Mat |
Technique: | Needle Mat |
2)high dry strength, 3) able to construct, 4)resin permeable good 5)high humidity-resistant description Needle punched fiberglass felt is an excellent new type of high temperature resistant filtration material with reasonable structure, which uses 100% of fiberglass as raw ...
Come From Weifang Codam Insulaion Material Co.,Ltd
Technial Specification: Spec. (g/sqm) Width (mm) Area Weight (g/m2) Moisture Content Combustible Content (%) Powder (EP) Emulsion (EE) CSM100g/m2 (50~3120)±5 100±10% ≤0.20% 8.0-9.8 7.5-8.0 CSM120g/m2 (50~3120)±5 120±10% ≤0.20% 8.0-9.8 7.5-8.0 CSM200g/m2 (50~3120)±5 ...
Come From CHINA BEIHAI FIBERGLASS
Specification Compositions Fiberglass Weight (g/m2) 800-1000 Thickness (mm) 2.5-3.0 Tensile strength (Mpa/min) warp >1800 weft >1800 Liner shrinkage(%) warp ≤1.5 weft ≤1 ...