AR Fiberglass mesh
Product Details
AR fiberglass chopped strand should be stored dry in their original package, the best conditions being at a temperature of between 15 and 35, and at a relative humidity of between 35 and 65%. If the product is stored at low temperature (below 15), it is advisable to condition in the workshop above 23 entironment for 24 hours before use to prevent condensation or brittlement.
Storage:
Each roll has a self-adhesive label. Each pallet will have two labels on two perpendicularsides.
The approximate net weight of one pallet is 290 kg, gross weight for 335kg. It is possible to pack 20 pallets in a 20 container.
Height 113 cm). Each complete pallet is protected by polyethylene shrink-wrap. Toallow double stacking, a plywood sheet may be placed across the top of the lower pallet.
36 rolls are loaded vertically on a wooden pallet of dimensions 113 cm x 113 cm (total
Each 50m\100m \200m (negotiable)roll of HUIERJIE AR SCRIM is supplied on a 50mm diameter cardboard tube and protected by a polyethylene bag, Roll dianter 18cm\24.5cm\28.5cm.
Packaging-Labeling
(3)Reinforced material of internal and external insulation system of wall. Especially for External Thermal Insulation Composite Systems (ETICS). It can reinforce wall and prevent cracks. It is an ideal engineering material in construction.
(2) It is used in roof waterproof and gypsum\marble\mosaic or board reinforcement.
(1) It is used for layout, coating or mechanical formed GRC.
Application:
Strain breaking point: 2.4%
High alkali resistant
High strength, elastic modulus up to 80.4Gpa
Good cohesion with concret
Good stableness
Properties:
HUIERJIE AR GLASSFIBRE MESH is on the basic of AR Glassfibre woven fabric. Glassfibre Chemical composition import ZrO2 14.5-16.7%; Filament coated with alkali-resistant size; Woven fabric any more coated with alkali-resistant waterproof high polymer material. It can mostly resist the corrosion of high alkali substance of common portland cement.
AR Fiberglass mesh is on the basic of AR Glassfibre woven fabric.Glassfibre Chemical composition import ZrO2 14.5-16.7%.
- colour as you need:as you need
- Yarn Type:C-Glass
- Weave Type:Twill Woven
- Mesh Size:3*3 4*4 5*5 6*6 7*7 8*8
- Width:50\100\200cm
- Brand Name:HUIERJIE
- Place of Origin:Hubei China (Mainland)
- Country:China (Mainland)
- telephone:86-0710-3121277
| colour as you need: | as you need |
| Yarn Type: | C-Glass |
| Weave Type: | Twill Woven |
| Mesh Size: | 3*3 4*4 5*5 6*6 7*7 8*8 |
| Width: | 50\100\200cm |
| Brand Name: | HUIERJIE |
| Place of Origin: | Hubei China (Mainland) |
Send inquiry / quota request to AR Fiberglass mesh
Relate products of AR Fiberglass mesh
Fiberglass Mesh Fabric for Drywall Stucco, supplied in rolls, with following specifications. 145g White Fiberglass Stucco Mesh Mesh: 4x4 mm 125g/m2 White Fiberglass Stucco Mesh Mesh size: 5×5mm Alkali Resistant, White, 4.5 Oz 38\" (96.5cm) x 150 ft (50m) rolls Fiberglass Mesh ...
Come From AoYong Glass Fibre Fabrics Co., Ltd.
Self Adhesive Fiberglass Mesh Tape for Stucco Plastering in Wall Constructions, Rendering Cracks as Drywall Tapes and Insulation Tapes in Building Insulation System. Ideal Material for the Dry Wall and Ceiling Problems. Fiberglass self-adhesive joint tape can be widely used in ...
Come From AoYong Glass Fibre Fabrics Co., Ltd.
Fiberglass reinforcement mesh can be supplied in rolls or tailored with razor or knife to stripes for reinforcing the wall plastering as well as for mending the possible cracks or hole in the concrete wall surface. Applied to both exterior and interior structural render ...
Come From AoYong Glass Fibre Fabrics Co., Ltd.
