Fiberglass Drywall Joint Tape
Product Details
Instruction:
>1. Wall must be clean and dry.
>2. Center and apply tape over the length of the joint. Pressing firmly.
>3. Apply a generous first coat of compound over the tape. And through the mesh, making sure to completely fill the joint crevice. When the joint has been completely filled, wipe off any excess
compound with the drywall knife leaving enough to cover the tape.
>4. Let dry completely. Then sand lightly.
>5. Apply sufficient thin finishing coats to product a smooth wall surface.
>6. Cut or butted boards do not have a tampered edge. Therefore, special care must be taken to assure proper compound penetration of all joints. This may result in slight build up of compound
that will require an increased amount of edge feathering.
Fiberglass Drywall Joint Mesh
Backing Polyester Film With Glass Yarn
Adhesive Acrylic Solvent Acrylic Emulsion
Colors
Adhesion To Steel(N/In) 14 20
Tensile Strength(N/In) 490 790
Elongation(%) <12
Total Thickness(mm) 0.100
Fiberglass Drywall Joint Tape,Self-Adhesive Fibreglass Mesh Drywall joint cross-section Force compound into all joints
- Model Number:JS-035
- Brand Name:Jiesheng
- Place of Origin:Zhejiang China (Mainland)
- Country:China (Mainland)
- telephone:86-574-62134817
| Package: | CTN,PALLET |
| Supply Ability: | 100000 Square Meter per Week |
| Minimum Order Quantity: | 50000 Square Meter |
| Payment Terms: | L/C,T/T |
| Port: | Ningbo |
| Model Number: | JS-035 |
| Brand Name: | Jiesheng |
| Place of Origin: | Zhejiang China (Mainland) |
