Acylic Casting Glass Mold

Metal Frames
For short haul markets we use returnable metal frames.Provide metal frames for Taiwan customers, put the well-paired Glass on the metal frames.

Wooden Cases
These are used for our long haul markets including Europe,North and South America,the Middle East,East & South asia.  They are produced to a strict specification and are regularly tested to ensure they meet the customers demand.

Delivery:

surface quality is continually inspected to produce a high quality surface finish with minimal blemishes, to meet the exacting demands of the cast acrylic customers.Edge finish has been specifically profiled to reduce the risk of breakage due to mechanical impact during the casting process.

Our own developed multi-section cutting process can make smooth surface & paring is unnecessary as we use high technology and special designed computer software integrating with various measuring devices.Our glass molds have No glass wave, it is suitable for acrylic mirror glass. Consistent production process,Four sided round edging work can reduce the damage to glass mold.

Vertical-suspended tempering process, average stress above 10000 psi. the allowable bow of the glass mold is controlled within 0.1% to ensure ideal flatness.

Stanley Glass Molds innovative and progressing production ability provides acrylic casting industry a high quality, well-paired product. Repeatedly inspected at all stages during the production process,  ensuring the highest quality product. With a consistent production line to ensure best quality for our customers.

The sampling match test makes sure the interval between two plates below 1mm by hand checking procedure.

A 16 points laser measurement to follow the direction of the measurement and measure it continuously to best match two plates of glass The pairing data would be provided and stored in our data base.

Strict quality inspection, computerized system measurement for the glass mold paring. Through inspector hand check can ensure ideal paring quality, also provide a competetive product to the acrylic sacting industry.

By specially designed computer software, Stanley Glass Mold is able to produce glasses to stricter tolerances,also offers our customers convenience without pre-preparation our customers can use glass mold as soon as glass molds arrive and aided glass can be supplied already paired into cells thus alleviating the need for glass sorting by the caster.

Pairing:

 Other products
Products require good flatness and no wave such as automatic door and exposure unit.

 Patterned
SGM is also available with a patterned finish to add still further variation to the range of acrylic sheet that can be produced. We have decorative design and various patterns, company logo patterns available in 10mm thickness.
 

Diamond
SGM provides diamond petterns avaliable in 10mm thickness.
 
 Thickness  Max Size
 Min Size
 
10mm
 2000mm?2000mm
 700mm?700mm
 
 

Acid etched glass is used to produce matt surface acrylic sheet. 
  
 Thickness  Max Size 
 10mm~12mm
 1500mm?2700mm
 700mm?700mm

Matt (Asid)

Clear glass provides the high gloss finish for cast acrylic sheets.  It is available in toughened or annealed form and can be purchased in thicknesses of 10 or 12mm.  Enquiries for other thicknesses will be considered.
 
 Thickness  Max Size 
 
5mm~8mm
 1200mm?2400mm
 700mm?700mm
 
10mm~19mm
 2200mm?3200mm
 700mm?700mm 
 

Clear

Products:

1.Flatness: quality could be ensured by unique production method of two-way flatness control.
 
2.Smooth:treated by our own developed multi-section cutting process which can make smooth surface.
 
3.Pre-preparation is unnecessary. 
 
4.Paring is unnecessary as we use high technology and special designed computer software integrating with various measuring devices.
 
5.No glass wave: suitable for acrylic mirror glass. 
 
6.Consistent production process. 
 
7.Four sides round edging work can reduce the damage to glass mold.
 
8.Heat soak test provides longer service life. (Additional charge)
 
 
9.Vertical-suspended tempering process, average stress above 10000 psi. the allowable bow of the glass mold is controlled within 0.1% to ensure ideal flatness.
 
10.Interacting customer service. 

10 Features:

The Acrylics Glass Mold plays inportant role in Acrylic Factory.
It goes without saying a high quality of glass mold can produce good quality acylic sheet.
Because of the great flatness of Stanley Glass Mold, MMA saving can be realized.

Applications:
SGM is used in the process of casting acrylic sheets by the majority of the world's leading acrylic casting companies. T here are a variety of applications that contain cast acrylic sheet.

-Signage -Furniture -Lampshade -Automobile -Point of Sale Displays
-PC case.  -Light Box  -Aerospace -LCD Screen  -Sanitary Ware e.g. Baths

Starting as two small glass retailer families in 1935, With more than fifty years of experience in glass, now Stanley Glass Group has become one of the leading glasses processing and manufacturing company in Taiwan.

Consider Quality, Efficiency, Service, Innovation, and Sharing as five key elements that sustain Stanley Glass Groups growth. In 1996, it has received ISO 9001 and CNS certificates.
To provide customers with the best service, its corporate philosophy is to deem customers growth as its own growth. The quality of our products has been well known for many years and experienced in assisting several agents. In glass mold market, we are regarded as the mainstream for our professional brand image. We provide an ideal casting acrylic glass mold production line for international customers. Undoubtedly, we have become the leading company in Acrylic Glass Mold industry.

SGM Products include Clear, Matt (Asid) Casting Acrylic Glass Mold.