Small Pellet Mill

Mini Pellet Mill for captive production of 100-200 KG. Pellet feed per hour complete with entire sub-assemblies, drive motor and variable drive arrangement. The sub-assemblies may be noted as under. Power requirement would be: 415 Volt, 3 phase, 50 HzThe features may be noted as under. **Four legged platform on which the machine would be installed and covered all side. **Die holder assembly complete with die, rollers assembly, front and rear ring and bracket T Shaft would be fitted with front and rear bearing front cover, front and rear scrapper and cutting knife assembly; **4 / 5mm dia Hi. Chrome steel pellet die fitted with the mill**One Paddle Feeder with storage hopper of 50kg. **Special drive arrangement for variable speed feeding (AC frequency VFD with special geared motor and enclosed control panel) for operation; **11 / 18. 5 KWelectric motor and 0. 55kw geared motor; Specifications: 1. Pellet Mill body will be of Mild Steel constructions; 2. Pellet Mill Main Drive 11KW for 100Kg / HR & 18. 5 KW for 200 KG / HR. 3. Pellet Mill Die will be made from Hi-chrome stainless steel; 4. Press Roll Shell will be made from alloy steel forging and will be hardened and ground: 5. Paddle Feeder with storage Hopper cap. 50kg; 6. Paddle Feeder drive 0. 5kw / AC Variable Frequency Drive (VFD) for variable feeding of feed into the pellet mill with geared motor. 7. Pellet Mill will be installed on a self-supporting four legged structure. 8. Total dimension of the machine will be: 1000mm x 1000mm x 1750mm. 9. A control panel will be offered with on-off and a rotary switch for easy operation for the VFD. The control panel will also have ammeter to measure the current drawn by the motor. 10. All contact parts of SS 304 would be polished.