Triple R10 food processing machine

5. When make the upper-heater board close partly, dont press the automatic button completely, but to press that softly.

4. If want to stop it when the machine works, turn on the time setting switch left, the upper-Heater board opens directly, beginning operations again, stop roast time.

3. When begin operations again, press the button one time, the switch turns off, and press the button onetime again, the switch turn on.

2. If settled time pass, upper-heater board opens automatically.

1. Settle the temperature and time as introduced above, then press the automatic button.

Use Method

     Adjust the time switch to set roasting time, it is possible for 60 seconds at most

5) setting time

   c. Go over fixed temperature, the heater-boards switch turns down, go under fixed temperature, the heater-boards switch turns up ( 5 degrees deviation)

   b. turn the adjuster right and left, at the point the lamp turns down or on.

4) a. Roasting squid and dried filefish, when the temperature goes up to 180 degree the lamp turns on,

3) Set up the temperature of  the upper-heater board and under-heater board, the red lamp turns on and the temperature goes up.

2) Raise the power switch on the front (cut circuit)

1) To connect the power cord.  ( (220 V  3KW)

Installation  

1. Dimension: 510mm (L) x 435mm (W) x 340mm (H) 40 KG
2. Power: 220V 3Kw / hour

Specifications

It can be used for roasting.
Roasting procedure can be operated with automatic button from open to close the plate.