Emulsifying Mixing Machine

The aggregate material:
The contact with material part is high-quality stainless steel SUS316L, all the stainless steel polished in 300MESH. The thickness is 5mm, bottom outpour material, three universal wheel move.
Technical parameters
Design Volume(L) Work volume(L) Stainless steel
350 280 SUS316L

350L Stronger kettle

The Lobe pump is specially designed to transport the high viscosity material, used for hygiene and without fungus conditions, it works on the material softly, the transport speed can be controlled, all the part contact material produce by SUS316L and use "easy fix"(ISO STANDARD QUICKLY OPENED JOINT) form contact with kettle, the pump conformity with GMP rules.
1\all the part contact material produce by SUS316L
2\transport the high viscosity material
3\temperature: -30_200 degree.
4\Speed is slow, during 200 rpm ---600 rpm, so that make sure don't change material's quality.
6\No touch rotor with rotor, no broken with long time working, work softly and efficiency highly.

Lobe pump

This machine is the our product newly developed by technology from Germany, it is refer to the Mixer of the Germany speciality technology which have the accurate date theory, ensure the tiptop cut off frequency, the least disperse grain, the preeminence quality.
The homogenizer on main shaft working by electromotor, according to the high shear
Wheel and the cutting case to strong cutting off\impact\Without rules mobility, etc. ]
The speed is from 0-2900rpm then the material turn to a particle of 200nm-2um prom
At the cut interstices and dispersing
Within a short time.
Applicable: Cosmetics, emulsion, bath shampoo, ointment, tooth paste, oil, perfume, beverage, pharmaceuticals, coating andadhesive
Size:
The size of emulsifying pot rack(Length X Width X Height): 2700mmX1350mmX3230-4700mm
The size of the oil pot & water boiler rack(Length X Width X Height): 2700mmX1250mmX2150mm.
The size of all machine(Length X Width X Height): 3750X3620X3320-4700mm
The aggregate material:
The contact with material part is high-quality stainless steel SUS316L, outside and middle jacket are stainless steel SUS304, all the stainless steel polished in 300MESH.
The emulsifying pot with three layers are making of three layers, the thickness is 8mm of contact with material, the thickness 8mm of middle level, outside layer is 8mm.
The oil pot and the water pot that the thickness is 6mm of contact with material, the thickness 4mm of middle level, outside layer is 4mm.
The Vacuum system: Gardner Denver Nash pump the power is 3kw.
The Hydraulic system: Oil cylinder, actuator, Solenoid valve, oil tank, pressure retaining valve
Control system:
Outfit 
Transducer SIMENS
Motor SIMENS
316L Stainless steel PU XIANG (Finland)
304L Stainless steel PU XIANG (Finland)
ALL ELECTRICAL PARTS SIMENS

4.  HOMOGEINZER

3.  Water pot:
1). Design Volume: 650L
2). Working Volume: 500L
3). Disperse speed: 960 rpm
4). Disperse power: 1.1KW
5). Heated power: 24KW

2.  Oil pot:
1). Design Volume: 500L
2). Working Volume: 400L
3). Disperse speed: 960 rpm
4). Disperse power: 1.1KW
5). Heated power: 24KW

The aggregate: Oil pot\water pot, Emulsifying mixer pot, heating and cooling system(Steam heated), Emulsifying system(homogenizer), Scraper stirring system(Low-speed Mixing system), Vacuum system, up-down cover lifting system(Hydraulic Lift), Discharging system.
Main Technical Parameters:
1.  Emulsifying mixer pot:
1). Design Volume: 1000L
2). Working Volume: 800L
3). Bear pressure of Jacket: 4.5kg
4). Scraper stirring speed: 0-86 rpm
5). Scraper stirring power: 4KW
6). Homogenizer speed: 0-2900rpm
7). Homogenizer power: 11KW
8). Heated power: 36KW

try mixing machine    to get through more products