computerized flat knitting machine

net weight: 1400kgs

Length *width*height: 290*90*200 CM

Dimension & Weight

3 phase AC 220V 1.2KVA

Power supply

CTR indication English and Chinese are standard version. Supplement with other languages (optional software)

Language display

USB memory interface

Data input

1024X4096 hung memory for the width and pattern length design.

Memory capacity

Built-in controller. Data input by hand or USB memory disc. Stored program for flat knitting machine.

Controller

Yarn breaking, knot, press off, needle break, over current, roll back, wrong racking, inappropriate position of presser, excessive yarn, and reaching on production target offer automatic stop.

Stop motion

AC servo motor, tooth shape dricing belt, no oil needed. 24 speed selection and freely programmable.

Carriage drive system

24 levels changeable tensions, adjustable automatically on each level. Automatically open and close.

Sub take down roller

24 levels changeable tensions, adjustable automatically on each level.

Main take down roller

Servo motor control, the programmable racking position within 2 inches, each also having 1/4, 1/2 and 3/4 micro adjustable positions.

Racking system

This system composed by two additional pieces of sinker needle bed. The sinker presser degree adjustable the positions by knitting program command.

Movable sinker

2*8 sets yarn carriers on 4 double side rails, switchable in any area within the knitting width. Also can be equipped with special design yarn carrier for intarsia pattern (optional device)

Yarn carriers

Each system has 4 sets special solenoids. Double cam system equipped totally 8 sets solenoids, which can be installed or removed simply from the carriage and maintained easily.

Needle selection

Each system setting is controlled by a step motor. It has 24 stitches of independent selections and each of them ranges from 00-365 steps for knitting pattern.

Stitch cam

Compound knitting cam system, each system can transfer from the front to rear, rear to front or both front and rear simultaneously without direction restriction. Auto racking and auto receive.

Transfer cam

Composite design, use three ways technology. Each system can perform loop + doubling stitch +not knitting at the same time.

Knitting cam

One carriage with double system setup

Knitting system

Knitting speed varies according to gauge and knitting condition. Max.1.2m/sec., 24 speed selection programmable command control.

Knitting speed

3, 5, 7, 9, 12, 14/per inch

Gauge

Variable stroke. Max 52 (132mm)

Knitting width

The steel needles are inserted on the bed. Replaceable segment can be available when broken down.

52

Needle bed

SY52-2S

Model

Specification of Computerized flat knitting machine

we produce computerized flat knitting machines since 2006 year.
our machines are used for weaving woolen sweater.