Double Raschel Machine

3.       ELIMINATION OF THE CASTING PROCESS FOR LATCH NEEDLE UNITS AND ITS HIGHLY TRAINED WORKERS.

2.       THE EASY CHANGE OF INDIVIDUAL NEEDLES REQUIRES NO SPECIALIZED OPERATORS.

1.       EASY REPLACEMENT OF NEEDLES, DRASTIC REDUCTION OF DAMAGE ON FABRIC WHEN REPLACING NEEDLES.

INDIVIDUAL LATCH NEEDLE SYSTEM

5.       MANUAL FORWARD & BACKWARD MOTION.

ACCORDANCE WITH BEST QUALITY.

4.       THIS SYSTEM SUPPLIED NOT ONLY AN EXACT AMOUNT OF YARN IN

3.       SIMPLE & EASY TO OPERATE WITHOUT TRAINED WORKER

2.       ELECTRONICALLY CONTROLLED, LOW NOISE LEVEL & REDUCED MAINTENANCE AND HIGH OPERATOR CONVENIENCE

1.       SUB-MOTER DRIVEN YARN FEEDING SYSTEM

ELECTRONIC YARN LET-OFF SYSTEM

* 1270m/m BATCH DIAMETER.

* STANDING SEPARATE FORM THE MACHINE TENSION CONTROLLED, WITH ITS OWN DRIVE AND ADJUSTABLE BATCH TENSION.

BATCHING DEVICE

* 6 BEAM CARRIER SHAFTS OF 152mm DIAMETER

* 6 WARP BEAM POSITIONS OF 30 OR 40 FLANGE DIAMETER ARRANGED IN A FREE STANDING FRAME ABOVE THE MACHINE.

BEAM FRAME

PATTERN DRIVE CHAIN LINK OR COMPOSED BY 6 PATTERN DISK

PATTERN DRIVE

* WHEN CUTTING OF PILE WITHOUT NOTICE, IT CAN REDUCE INFERIOR RATE OF PRODUCT BY AUTO STOPING OF M/C

* SETTING ULTRA - SONIC SENSOR ON PILE GUIDE BAR (PILE L3, L4)

AUTO STOP MOTION(OPTIONAL PART)

MAX 580 r.p.m

SPEED OF MACHINE

E-16, 18, 22

GAUGES (NUMBER OF NEEDLES PER 25.4mm)

77-195cm, 130-330cm

WORKING WIDTH

DS-DBRM6(12-24, 16-30)EL

TYPE OF MACHINE(MODEL)

* 1270m/m BATCH DIAMETER.

* STANDING SEPARATE FORM THE MACHINE TENSION CONTROLLED, WITH ITS OWN DRIVE AND ADJUSTABLE BATCH TENSION.

BATCHING DEVICE

* 7 BEAM CARRIER SHAFTS OF 150mm DIAMETER

* 7 WARP BEAM POSITIONS OF 30 OR 40 FLANGE DIAMETER ARRANGED IN A FREE STANDING FRAME ABOVE THE MACHINE.

BEAM FRAME

PATTERN DRIVE CHAIN LINK OR COMPOSED BY 7 PATTERN DISK

PATTERN DRIVE

* WHEN CUTTING OF PILE WITHOUT NOTICE, IT CAN REDUCE INFERIOR RATE OF PRODUCT BY AUTO STOPING OF M/C

* SETTING ULTRA - SONIC SENSOR ON PILE GUIDE BAR (PILE L3, L4, L5)

AUTO STOP MOTION(OPTIONAL PART)

MAX 580 r.p.m

SPEED OF MACHINE

E-16, 18, 22

GAUGES (NUMBER OF NEEDLES PER 25.4mm)

130-330cm

WORKING WIDTH

DS-DBRM7(3-12)EL

TYPE OF MACHINE(MODEL)

TECHNICAL DESCRIPTION

DS-DBRM7 (2-12) EL, DS-DBRM6 (12-24, 16-30) EL
2-LATCH NEEDLE BARS AND 6~7GUIDE BARS