Flat Jacquard knitting machine

139" x45" x76"        1625/1889

l x w x h                n.w. / g.w.

measurement

2.0KVA ac220v, 3phase, 50/60 hz (2.0kva)

power supply

128k, 2048 x 2048" memory

memory

touch panel lcd 10.4" and 640 x 480 with language selection in chinese, english and japanese

operation screen

USBkeyboard input or 3.5" floppy disk drive readable.

data input

tri-color signal shows operation status: green-normal operation,yellow-manual pause, red-abnormal stop.

operation lamp

fully safeguarded by safety cover to resist from noise, dust and danger. safety sensor stop is installed

safety cover

ceramic-made electrical tension to enable easy yarn operation.

machine stop at big yarn knot and slow down when small yarn knot.

top tension

automatic adjustment of carriage-stroke according to knitting width

fully controlled by ac servo motor and driven by gear-belt.assuring maximum transmit to twist rigidify.

main driving system

completion, over torque, program error...etc.

automatic stop motion during yarn breakage, knot, press-off, needle breakage, shock, reverse rolling, task

emergency stop motion

sub roller:clutch stepping motor

main rooller/sub roller: 64-level take-down tension automatically adjusted and controlled by torque motor.

roller

4 inches racking range, controlled by servo motor and ball-rolling screw.

racking

controlled by stepping motor, 64 memory levels of 0-99 density available for programming.stitch level function is also available.

stitch

auto positive yarn-feeding device on both left and right ends

yarn feeder

needle selection with single 6-level solenoid magnet control., front and back jacquard

needle selection

8 yarn feeders on 4 yarn guide rail.

yarn carriers

1.2m/sec.

knitting speed

smc-512 is well equipped with transfer and split stitch function.

transfer and split stitch

simultaneously transfer from both directions

transfer

2x1 system operation,3-way techniques on structure system,with knit,transfer and half-stitch function.

carriage

3.5G/7G/10G/12G/14G/16G/

gauge

50"

knitting width

smc-302s

model no

Stitch System: The design of the carriage is engineered to be built upon 4 angle supporting  design. Stitch quality is controlled independently by stepping motors attached with stitch  cam within carriage.
Presser Foot System: The presser foot system of SMC-302S located in non-knitting area with open  sinker system to allow special knitting structure such as pocket and beetle-structure.
Pressing Cam: SMC-302 pressing cam can knit, tuck, rest; or transfer, receive, rest  or coarse stitch, fine stitch, or rest in the simultaneous course.   The device allows  knit-tuck-miss or "transfer-receiving-miss" of "coarse-stitch,  tight stitch & miss" at the same course.
CAD Design System: All knitting parameters controlling stitch, speed, tension, and other  knitting characteristics can be entered into CAD system for programming.
Operation Design: Machine is equipped with unique touch-panel operation, all parameters   are clearly displayed in the panel screen, and adjustable whenever required.

Smc-302 is a compact fully computerized jacquard flat kntting machine with double system  all parameters are fully computerized tuned as required, machine is also well equipped with auto-stop funation by erro detection devices and unique sinker system to enable more flexible knitting function, all controlled by computeriized needl selector, the machine can execute full-function jacquard and full-fashion structure

Profeesional integration leading the main stream in flat knitting machinery industry

all parameters are fully computerized tuned as required, machine is also well equipped with auto-stop funation by erro detection