Water Jet Cutting Machine Model: DWJ1520-FB

                     them in your CNC programs only by a mouse click.

                     materials. Without inputting the parameters again, you can use

                   - Communication between PC and CNC through serial or USB interface    

                   - Auto- transforming DXF files into CNC program.    

         -     Cam Software (1 set)

-         MotorizedZ axis

-         Powersupply: 415VAC, 50Hz, 3 Phase (Standard) (or) as per your Purchase Order

-         TraverseSpeed: 0-15 m/min

-         Drive: A .C. Servo Drive

-         NC  system- : Huaxin 320W

-         Travelof Z axis: 150mm

-         Travelof Y axis: 2000mm

-         Travelof X axis: 1500mm

-         Cuttingtable size (X?Y):1600?2100mm

-         Structure:Flying arm

-         DWJ1520-FBCNC x-y cutting table

CUTTING TABLE

TECHNICAL SPECIFICATIONS

Environmentally friendly and clean production without poisonous gases.

Tension-free processed parts due to minimal cutting force.

Maximum degree of material utilization due to the smallest of part separation distances (partially free of burrs) and part-in-part production.

Material-saving production due to reduced cutting width and the nesting of several parts on a single sheet.

Flexible processing of virtually all materials with consistent high quality.

Cold cutting without thermal influences.

ADVANTAGES OF WATER JET TECHNOLOGY:

Ceramics, Stones, Glass, Metal Artwork, Metal Cutting,Exotic & Non Traditional Materials, Automotive, Aerospace, Electronics, Job& Machine Shop Applications, etc.

This machine can be used for following Applications and Industries:

Water Jet Machine uses cold supersonic abrasive erosion to cut almost any materials both metals and nonmetals. The highly pressurized water stream is forced through a tiny area which carries abrasive garnet to erode away the material.

Acrylic, Alloys, Aluminum, Brass, Carpet, Ceramic,Composites, Copper, Corian, Felt, Foam, Fiberglass, Formica, Gaskets, Glass,Granite, Inconel, Insulation, Laminates, Leather, Marble, Plastics, Quartz,Rubber, Silicone, Stainless Steel, Steel, Stone, Titanium, Wood, etc.

WATER JET MACHINE CAN CUT RANGE OF MATERIALS:

A series of high-pressure lines, pumps and intensifiers force a stream of filtered water through a tiny orifice in a jewel. The stream, which is pressurized up to 60,000 psi, mixes with fine abrasive garnet in a tube to provide extraordinary cutting power. Motion-controlled machines transport the jet nozzles along programmed paths to cut complex profiles.

PRINCIPLE OF WATER JET:

high precision, low cost, easy to be operated and widely used

try water jet    to get through more products