Electric Discharge Machine

Contact person: Mr. Nishikant Patil (09860998911)

Fax Ph: 0230 2460651

Kolhapur - 416 122.

Behind Kolhapur Axle, M.I.D.C. Shiroli,

Plot No.3768, Sr,No.595/2,

VISION ELECTROMECH

Address for Contact:

_{***We have developed Portable TAP DISINTEGRATOR EDM for removing Broken Drills & Taps.@ 50 kg weight. Very easy to carry any where. One can put the machine on Bigger job OR put the job on machine. Very competitive Price.}

WE MANUFACTURE SPM EDM's

We undertake Reconditioning of old Electric Discharge Machines. We deal only controllers for old EDMs.CARBIDE CONTROLLERS ON REQUEST.

After sales service: within 48 hour, after receiving the complaint.

Very Low brake down rate.

Material Removing Rate is 7 mm?/Amp/Min.

Less than 0.1% wear of master.

0.5 ?mm Surface finish.

Built in OVSP for prevention of single phasing & over voltage.

Polarity changing facility Built in & free of cost.

Reverse Sparking facility Built in & free of cost.

100 ON Time & 100 OFF Time settings, you will get 10000 settings.

Micro-stepping Motor.

Digital Controller with micro controller base & PLC Logic control.

Indigenously designed & developed specially, to suit the Indian Conditions.

CONTROLLER:

Cylindrical sparking Assembly (For sparking on Rollers)

Rotary Sparking Assembly for EDM Drilling.

Three Axis DRO (Digital Read Out System)

EXTRA ACCESSORIES:

Flushing Pot for Holding Small Work piece.

Flush Aid with Permanent Magnet.

Flat Electrode Holder.

Vee Holder for round & square electrode Holder.

Third Axis Corrector for ZZ Plane.

Axis corrector for XZ & YZ Plane, correction of electrode.

STANDARD ACCESSORIES:(Free with machine)

Easy table movement & Positive Brakes.

Table movement is on L.M. Guides & Block to avoid friction & wear after some period.

Least count is 0.005 mm.

Ball screws are fitted for high accuracy (All 3 Axis).

Slides made of C.I. Grade 25.

 TABLE:

Electrical discharge machining (EDM) is one of the most extensively used non-conventional material removal process. Invented in 1940s, it attracts more and more research for the need of the industrial production, and the scientific experiments. The removal of metals in this process is characterised by the erosive effects from a series of electrical sparks generated between tool and work materials with constant electric field emerged in dielectric environment. EDM can machine any electrically conductive part regardless of its hardness. The process is typically used for manufacture of moulds, dies and automotive, aerospace and surgical components. In addition, EDM does not make direct contact between the electrode and the work piece eliminating mechanical stresses, chatter and vibration problems during machining. The process has been accepted as the standard machining process in many industries

WHAT IS EDM?