Gleason 606 & 607 Hypoid Gear Rougher/Finisher

Stock No. C-15695
 

SELL IN CONJUNCTION WITH 15695, Gear Rougher

 Complete with:-
  Stock divider.
  Hydraulic chucking.
  One set of speed gears to cut one gear
  FORMATE finishing gears.
  Index arrangement to cut one gear
  Chip conveyor having magnetic separator.
  Guards.
  Coolant.
  Electrics 460, 3, 60.

 CAPACITY:
 Max pitch diameter: 10:1 ratio............ 10.5"           266 mm
     2.5:1 ratio............ 9.375"          238 mm
 Coarsest diametral pitch.................. 2.5 D.P.  10 Module
 Min extreme ratio......................... 2.5:1
 Max face width............................ 1.625"  41 mm
 Max depth................................. 0.75"           19 mm
 Number of teeth........................... 20 - 150
 WORKSPINDLE:
 Diameter of taper hole at large end....... 3 27/64"
 Taper per foot............................ 1/2"
 Depth of taper............................ 5/8"
 CUTTER DIAMETERS.......................... 5", 6", 7.5" & 9"
 FEEDS & SPEEDS:
 Cutter speeds............................. 10' - 75'/min 3 - 22 m/min
 Feeds..................................... 2 - 8 sec/tooth
 ELECTRICAL:
 Main motor................................ 7.5 HP @ 1500 rpm
 Hydraulic motor........................... 3 HP @ 1500 rpm
 Coolant motor............................. 1.5 HP @ 1500 rpm
 Magnetic chip separator motor............. 0.125 HP @ 1500 rpm
 NET WEIGHT............................... 13,500 lbs  6,123 kg

Gleason 607 Hypoid Gear Finisher
Serial No. 761805    1978

Gleason 606 & 607 Hypoid Gear Rougher/Finisher