Power Press 20 Ton to 300 Ton

Note : Above specifications may change without notice towards the improvements in products.   Capacity in tons=50 tons
Bed size(inches)=18x20
Bed to Ram(inches)=12
Bed Bore(inches)=6
Gear Dia(inches)=26
Fly Wheel Dia(inches)=32
Crank Shaft Dia(inches)=4.3/4
Back Shaft Dia(inches)=3.1/8
Stroke(inches)=3.1/2
Hole in Ram for Die Clamping(inches)=1.5
No. of Stokes(inches)=60
Pully Size(inches)=7
Total Height(inches)=85
Motor Required=5 H.P.


Capacity in tons=75 tons
Bed size(inches)=20x22
Bed to Ram(inches)=14
Bed Bore(inches)=7
Gear Dia(inches)=30
Fly Wheel Dia(inches)=36
Crank Shaft Dia(inches)=5.5
Back Shaft Dia(inches)=3.5
Stroke(inches)=4
Hole in Ram for Die Clamping(inches)=1.3/4
No. of Stokes(inches)=56
Pully Size(inches)=7
Total Height(inches)=91
Motor Required=5 H.P.

Capacity in tons=100 tons
Bed size(inches)=22x24
Bed to Ram(inches)=16
Bed Bore(inches)=8
Gear Dia(inches)=34
Fly Wheel Dia(inches)=39
Crank Shaft Dia(inches)=6.5
Back Shaft Dia(inches)=4
Stroke(inches)=4.5
Hole in Ram for Die Clamping(inches)=2
No. of Stokes(inches)=53
Pully Size(inches)=7
Total Height(inches)=98
Motor Required=7.5 H.P.

Capacity in tons=150tons
Bed size(inches)=24x26
Bed to Ram(inches)=18
Bed Bore(inches)=9
Gear Dia(inches)=38
Fly Wheel Dia(inches)=42
Crank Shaft Dia(inches)=7.5
Back Shaft Dia(inches)=4.3/4
Stroke(inches)=5
Hole in Ram for Die Clamping(inches)=2
No. of Stokes(inches)=50
Pully Size(inches)=7
Total Height(inches)=109
Motor Required=10 H.P.

Capacity in tons=200tons
Bed size(inches)=28x30
Bed to Ram(inches)=20
Bed Bore(inches)=10
Gear Dia(inches)=42
Fly Wheel Dia(inches)=48
Crank Shaft Dia(inches)=8.1/4
Back Shaft Dia(inches)=5
Stroke(inches)=5.5
Hole in Ram for Die Clamping(inches)=2.1/4
No. of Stokes(inches)=46
Pully Size(inches)=7
Total Height(inches)=117
Motor Required=15H.P.

Capacity in tons=250 tons
Bed size(inches)=32x32
Bed to Ram(inches)=22
Bed Bore(inches)=11
Gear Dia(inches)=48
Fly Wheel Dia(inches)=52
Crank Shaft Dia(inches)=9
Back Shaft Dia(inches)=5.5
Stroke(inches)=6
Hole in Ram for Die Clamping(inches)=2.5
No. of Stokes(inches)=40
Pully Size(inches)=7
Total Height(inches)=128
Motor Required=20 H.P.

Capacity in tons=300 tons
Bed size(inches)=34x34
Bed to Ram(inches)=24
Bed Bore(inches)=12
Gear Dia(inches)=54
Fly Wheel Dia(inches)=58
Crank Shaft Dia(inches)=10
Back Shaft Dia(inches)=6
Stroke(inches)=6.5
Hole in Ram for Die Clamping(inches)=2.5
No. of Stokes(inches)=38
Pully Size(inches)=8
Total Height(inches)=104
Motor Required=30 H.P.                      FOR MORE INFORMATION SEE OUR WEB

1NCT Power Press- Power press manufacturers, India power press suppliers, mechanical power press manufacturers, power press machines suppliers, .... Rolling Key:Is fitted in the two parts of EN-34 alloy steel duty tempered andproperty ground and give a perfect service. All are being taken thatthe key may not break and is suitable to stand the jerks.

2. Alignment : Heighest degree ofprecision maintained during the fitting of ram and it's base is checkedvery property on 90 angel with the dail indicator. Horizontally &Perpendicularly.

3. Body : The press bodies are manufactured out of the close grain casting and steel fabricated as well.

NCT Power Press - Power press manufacturers, India power press suppliers, mechanical power press manufacturers, power press mach