STOCK # 74135 DOOSAN PUMA, 2000 SY, NEW: 2007 LATHE

SPECIFICATIONS:

CNC CONTROL: FANUC 18I-TB
CAPACITY:
-SWING OVER BED: 23.6"
-SWING OVER CARRIAGE: 21.6"
-MAX. BAR CAPACITY: 2.625"
-MAX. TURNING DIAMETER (MAIN SPINDLE): 13"
-MAX. TURNING LENGTH: 20.1"
-DISTANCE BETWEEN MAIN & SUB-SPINDLE: 33.8"

MAIN SPINDLE:    
-SPINDLE SPEED: 45 - 5,000 RPM
-SPINDLE NOSE: ASA A2-6
-DRAW TUBE ID: 2.677"
-SPINDLE BORE DIAMETER: 2.99"
-AC HIGH TORQUE SPINDLE MOTOR: 30HP
-MAX. SPINDLE TORQUE: 351 FT-LBS

MAIN SPINDLE C-AXIS:
-MIN. PROGRAMMABLE ANGLE: .001 DEGREES
-RAPID TRAVERSE RATE: 200 RPM
-REPEATABILITY: +/- .006 DEGREES
-POSITIONING ACCURACY: .0167 DEGREES

Y-AXIS:
-TRAVEL: 3.94"
-RAPID TRAVERSE RATE: 295 IPM
-REPEATABILITY: .00012"
-BED,SADDLE,CROSS SLIDE:
-TRAVEL (X/Z-AXIS): 9.8"/22.8"
-ANGLE OF SLANT BED: 30 DEGREES
-GUIDEWAY SPAN (X/Z-AXIS): 8.9"/14.2"
-RAPID TRAVERSE RATE (X/Z-AXIS): 790/945 IPM
-BALL SCREW DIAMETER (X/Z-AXIS): 1.3"/1.3"
-MAX. X-AXIS FEED THRUST: 2,020 LBS
-MAX. Z-AXIS FEED THRUST: 2,430 LBS
-X-AXIS REPEATABILITY: +/- 0.00006"
-Z-AXIS REPEATABILITY: +/- 0.00008"

TURRET:
-NUMBER OF TOOLS: 12
-TOOL HOLDER TYPE: BMT 55
-TURNING TOOL SHANK SIZE: 1"
-BORING BAR DIAMETER (MAIN SPINDLE): 1.5"
-BORING BAR DIAMETER (SUB-SPINDLE): .75"
-TURRET INDEX TIME (NEXT STATION): 0.1 SECONDS
-TOOL SELECTION: BI-DIRECTIONAL
-TURRET INDEX REPEATABILITY: +/- .0005 DEGREES

ROTATING TOOLS:
-RPM: 50 - 5,000 RPM
-SPINDLE MOTOR (15 MIN RATINGS): 7.5 HP
-TORQUE: 17.4 FT-LBS
-COLLET TYPE: ER25
-COLLET CAPACITY: 1/16" - 5/8"

SUB-SPINDLE:
-B-AXIS TRAVEL: 22.8"
-GUIDEWAY SPAN: 9.8"
-SPEED: 60 - 6,000 RPM
-MOTOR: 10 HP
-MAX. TORQUE: 34.7 FT-LBS
-SPINDLE NOSE: A2 #5
-SPINDLE BORE: 1.77"
-DRAW TUBE ID: 1.38"
-RAPID TRAVERSE RATE: 787 IPM
-MIN. PROGRAMMABLE ANGLE: .001 DEGREE (FULL C-AXIS)

COOLANT SYSTEM:
-PUMP PRESSURE: 65 PSI
-PUMP MOTOR: 1.2 HP
-TANK CAPACITY: 39 GALLONS
-HYDRAULIC TANK CAPACITY: 2.6 GALLONS
-VOLTAGE: 205 - 235 VOLT/3 PHASE
-POWER REQUIREMENT: 51KVA (134 AMPS AT 220 VOLTS
-DIMENSIONS (APPROX.): 123" X 67"
-WEIGHT (APPROX.): 10,670 LBS


EQUIPPED WITH:

CNC CONTROL: FANUC 18I-TB
SUB-SPINDLE
COOLANT SYSTEM

STOCK # 74135

DOOSAN PUMA, 2000 SY, NEW: 2007