Hot melt labeling machine

If you need any other information, please contact us.

-Glued label is delivered to main drum and faces to bottle coming out of timing screw with regular distance. Labeled bottles are transferred through side belt which presses label in perfect and are discharged.

-When vacuum drum turns and sensor detects labels on vacuum drum, hot metl glue roller goes into & put the glue on labels.

-After passing feeding roller, the labels come into & are cut in label cutting part, and cut labels are delivered to vacuum drum.

-Location of I-Mark is recognized, then the corrector calibrates & controls the speed of feeding roller and decides the correct cutting point on label.

-Sensor detects I-mark during labels go through feed roll.

-Labels loaded in roll stand are pulled through guide rail and roller by feed roller.

-This is roll-fed type labeler where label is supplied from roll.

3. Operating Principle:

-Label adjuster

-PLC control

-Air and lubrication part

-Label cutting knife

-Discharge start wheel

-Hot melt gluer

-Vacuum drum

-Label roll stand part

-Timing screw part

-In feed star wheel

-Infeed and outlet Conveyor

2. Composition:

1. Name: Automatic Wrap-around labeling machine

High-efficient Wrap-around labeling machine can label the PET bottle with OPP, PE or paper label. The capacity is 12000-40000bph

try hot melt    to get through more products