Merkur S Labelling Machine

* The labelling principle is cold glue. The glue pomp is working with pnomatic system.

* Electrical box is mounted to machine main body and clad by AISI 304 stainless steel.

* All electric motors are controlled by inverters.

* Machine conveyor is running with the machine main parts senronize.

* After the bottle/tin and label meet each other, they go through the turning belt and the sponge. Labels are adhered here by turning.

* The excess glue is taken by nails and feed back to the glue reservoir.

* The glue smeared labels are taken from label magazine by a wheel, and taken forward.

* If there is not a bottle/tin, the magazine don't gives a label.

* There is a photocell sensible for bottle/tin at the exit of the screw.

* There is a system on the opposite side of the screw adjust to send only straight bottles/tins also.

* Bottles or tins are conveyed to the machine entrance by the conveyor system. There is a screw here to adjust the grap length between to bottle/tin. And then all are ready for labelling.

* Because of the linear working principle, it can just work with wrap-around and one side labels.

* Merkur-S labelling machine has a swinging label magazine.

*

Merkur-S labelling machine has a swinging label magazine. It has linear working principle.