5.Pipe,Valve and accessory
4.Electric control system
3.Feeding resin system
2.Mixing tin of structural layer
1.Mixing tin of liner layer
Configuration of mixing resin system:
7.Pipe,part of pipe and valves
6.Electric control system
5.Stopper of calibration machine
4.Calibration head & moving device fore and aft hydraulic system
3.Small car for making mould up& down
2.Drive head of calibration machine and stopper
1.Calibration foundation
Configuration of Calibration machine after ejection mould:
7.Ejectric control system
6.Heating and curing equipment
5.Ejection mould equipment
4.Liner making equipment
3.Joint axisafter ejection mould
2.Tail of shelf
1.Drive head for reversing mould
Configuration of mould shelf with multiple axis:
8.Bracket mylar
7.Control system of computer,main electric control borad and accessorial electric control borad
6.System of timing frequency conversion
5.Draw-fiber shelf type simple
4.Resin groove type soaking in bottom
3.Winding carriage
2.Railway of liner making machine
1.Drive head of of liner making machine
Configuration of winding machine:
MT6 winding machine consists of winding machine,mould shelf with multiple axis,calibration machine after ejection mould,system of mixing resin etc.
DN50mm-DN300mm FRP pipe winding machine
Payment Terms: | T/T |
Place of Origin: | Jiangsu China (Mainland) |
CNC variable geometry 3 roll plate bending machine adopts the structure of oil cylinder down. The upper work roll of the wind tower bending machine is the main driving roll: the upper roll is driven by the hydraulic motor (one motor) through the planetary reducer, and the two ...
Come From Hubei Heavy Industry Equipment Co., LTD
CNC variable geometry three roll plate rolling machine adopts the structure of oil cylinder down. The upper work roll of the wind tower bending machine is the main driving roll: the upper roll is driven by the hydraulic motor (one motor) through the planetary reducer, and the ...
Come From Hubei Heavy Industry Equipment Co., LTD
Transformer manual coil winding machine Special equipment for distribution Transformer coils. The distribution Transformer is oblong or circular coil with a radius ≤ 500 radius ≤ 350, and it can satisfy the winding of amorphous alloy rectangular coil, and the copper wire ...
Come From PingXing Volmet company
4. Main technical parameters Model VOL-260 VOL-300 VOL-400 VOL-500 Diameter range of windable eletromagnetic wire 0.5-1.5mm 0.5-2.6mm 0.5-3.2mm 0.5-3.2mm Min inner diameter of winded coils 30mm 50mm 60mm 60mm Max outer diameer of winded coils 260mm 350mm 450mm 550mm Max height ...
Come From PingXing Volmet company
Description The equipment is mainly composed of: main box, base, automatic wiring rack, interlayer insulation device, electrical control, etc. 1、This machine adopts hard gear gear mechanical transmission system, with high efficiency and less than 70db 2、The motor has an ...
The equipment is mainly composed of main box, base, rear tailstock and electrical control. Application: High and low voltage power transformer winding machine is suitable for winding of reactors, high and low voltage coils of power transformers and other similar coils. Feature ...
Ningbo Dingming Machinery Manufacturing Co.,Ltd, founded in the year of 2000, is a comprehensive researcher, manufacturer and exporter series of thread winding machines,such as cone winders, cone and cheese winders,bobbin winder, prewound bobbin winder,king spooling winders, ...
Equipment name:(DN1-DN2)*L two-dimensional gantry-type winding machine Note: When ordering, please specify the range of DN1 (minimum diameter of product), DN2 (maximum diameter of product), L≤6000mm Equipment composition: gantry-type track, drive spindle, moving tailstock, ...
Come From Hengshui Fangchen FRP Equipment Technology Co., Ltd
DN4000 pipe winding machine: The range of diameter: DN2600-DN4000 The length of the product: 12000mm The range of winding angle: 45°—90° Pipe winding machine DN4000 pipe winding machine Pipe winding machine DN4000 pipe winding machine ...
Come From Hengshui Fangchen FRP Equipment Technology Co., Ltd
MT4-MT6 winding machine: It can produce 4-6 pipes at the same time, saving floor space and improving production efficiency. Main parameters and characteristics: 1. Diameter of pipe: DN250-DN500 2. Length of pipe: 6000mm-12000mm 3. Main shaft rotation speed: 130rpm/min 4. ...
Come From Hengshui Fangchen FRP Equipment Technology Co., Ltd