XG-600V NC through cutting machine

It is mainly applied to thermal cutting in through wire and of various duct system.Applicable work-piece material covers: carbon steel tube, stainless steel tubeand nickel-copper tube. On basis of human design, the equipment is of stable performanceand easy to operate, the advanced and reliable structure of capabilityof long-term continuous processing. Spindle gearing is located on right of theequipment.    Product main features   a. Main cutting mode covers O-branch I-branch b.1. Cutting perpendicular rectangular bore made in main pipe; 2. Perpendicular rectangular bore made in main pipe; 3. Perperdicular slot made in main pipe; 4. Main pipe perpendicularly intersects branch pipe through, main pipe bevels branchpipe through,main pipe is off center of branch pipe through; 5. Circular duct abutting joint(lobster) 6. Circular duct perpendicularly intersects plane, circular duct bevels pane; 7. Two fold branch pipe passes though; 8. Lobster miter cutting   Main technical parameter    Cutting pipe diameter: 60-600mmWorkpiece ovality: less than2%Work-piece length: less than6500mmCutting speed: 100-750mm/minTraveling speed: 100-5000mm/minOscillation angle of cutting torch: less than 45%Number of control shaft:41.Work-piece rotation axis: (stepless speed regulation)2.X axis axial shifting shaft of barrow along work-piece3.Plane oscillating shaft of cutting torch in X-Z axis.4.Vertical shifting shaft of cutting torch barrowSpindle bore that steel tube can go through:less than260mmMaximum course: X direction :6000mm Z direction:350mm.