- Each injector panel has quick-connect fittings.
- Simply cut the desired length of plastic feed line and push in the fitting.
- There are no expensive hoses or lines to replace.
- Plastic line is very durable, high pressure rated and very inexpensive to replace.
- The average time to replace a broken or damaged line is 20 seconds.
|
- A smaller unit serves the sizing section.
- They are remotely located to prevent damage.
|
- Unit incorporates a four pound reservoir that can last up to 85 eight-hour shifts.
|
- The unit is completely separate from the main system because weld rolls need more lubrication, more often than the rest of the mill.
- A one pound reservoir is included which can last up to 150 eight-hour shifts.
- Each injector is equipped with a failsafe indicator that notifies you if a bearing does not take grease.
- Each unit is equipped with a timer, which is adjustable for the number of cycles per hour and is wired into the run circuit of the mill. If the mill isnt running, the mill doesnt get
greased.
|
Roll Forming Central Lube System
Roll Forming Central Lube Systems are an excellent investment when it comes to maintaining your (or other machine component) and protecting your investment. These systems can
automatically lubricate all of the lube points on the machine while it is running production.
Central lube system for weld rolls
