Plantain Slicer

108-40  Cast iron feet, flush with bottom of drum.  Optional 1.25" high feet so bottom of drum is 3.75" below plane of feet.

Mountings:
108-30  Lip on base of drum allows for fastening to match your requirements and tanks.  Many users employ tubular stretchers or even 2 x 4's to permit 2-man positioning or for moving from tank to tank.

Standard Electrical: 120VAC, 60 cycles, 1 phase.  Specify your requirements at time of order.

Standard Slice Thickness:  Rotors machined for .062" target slick thickness.   Screw adjustors allow for + - .010" by operator.  Specify if different standard is desired.

Lengthwise slicing of plantains can be accomplished with standard potato slicer , Model 108-15

A set of two (2) knives will slice up to 40,000 lbs., or more, of properly prepared potatoes.  Longer knife edge life should be expected for slicing plantains or bananas.

For increased output, specify additional tubes.  You may use up to eight tubes for standard slices; six for diagonal; four for curved diagonal.

The four standard vertical 11" tubes have a 2.5" inside diameter to accommodate most plantain fruit and the curve of the bananas.  However, curved tubes are available to order.  We also offer 30 degree angle mounted tubes for diagonal slicing.  Special diameters available, by quotation, up to 4" I.D.

Knott's Plantain Slicers Additional Information :

4000 Slices per Minute (1000 per tube - specify up to 8 tubes)

530 RPM

Knott's High-Speed Plantain Slicer Model 108-40 :