sugar mill Machinery

 

          One (1)  -  Farrel, 60" x 34" Mill, including Transmission
                            consisting of a Lufkin High and Low Speed Gear Reducer
                            and Open Gear and Pinion.

          One (1)  -  Fulton, 60" x 34" Mill, including Transmission
                            consisting of a Lufkin High and Low Speed Gear Reducer
                            and Open Gear and Pinion.

          One (1)  -  Farrel, 54" x 33" Mill, including Transmission
                            consisting of a Farrel High and Low Speed Gear Reducer
                            and Open Gear and Pinion.

         Three (3) -  Krupp, 55" x 33" Mills, each including Transmissions
                             consisting of Farrel High and Low Speed Gear Reducers
                             and Open Gears and Pinions.

        One (1)   -  Gruendler Shredder

                                    MILL TANDEM

 

One (1) Farrell Herringbone Low Speed Gear Reducer,  Size: SRH2616, 300 HP, Ratio: 5.458:1, RPM: 500 to 91.6.

One (1) Final Drive, Service Foundry.  

One (1) Farrell Herringbone High Speed Gear Reducer --Rebuilt by Lufkin in 1996.  600 HP, Ratio:   6.97:1, RPM:  4485 to 643, Service Factor:  2.0.
 

Transmission:          

One (1) 600 HP Terry Turbine, Inlet Steam Pressure:  150 PSIG, with a Temperature of 366, Exhaust Pressure:  15 PSIG, Speed:  4500 RPM.       

            Drive:     

66?MILL: 

Service Foundry, 36?x 66?with 18?x 23?journals four (4) roll MILLs

                                    note:  the transmission applicable to mill #3 has been sold.

            One (1) Intermediate Gear with 63 tooth, 16" face width.
            One (1) Intermediate Pinion Gear with 19 tooth, 19" face width.
                                   One (1) Open Gear with 67 tooth, 19" face width, Spur Gear.   

            Transmission:        

 Diebert, Bancroft & Ross, 38?x 78?with 18?x 21?journals four (4) roll mills (2)

            Drive: The third and fourth mills common turbine drive has been sold. 

third and fourth mills:

TWO (2) Intermediate PinionS:  one (1) with 19 tooth, 19" face width and one (1) with 18 tooth, 19?quot; face width.  

TWO (2) Open GearS (final driveS):  one (1) with 67 tooth, 19" face width, Spur Gear-67T450 Bancroft and one (1) with 68 tooth, 19" face width Spur Gear.  

One (1) Farrell High Speed Gear Reducer, Model Number: SI 2410, service Rating:  900-1050 HP, Speed:  4000-4200 RPM, Ratio:  6.024:1.  

TWO (2) Intermediate GearS:  one (1) with 66 tooth, 14" face width and one (1) with 68 tooth, 14" face width, and    

Transmission:    

Diebert, Bancroft & Ross, 38?x 78?with 18?x 22?journals four (4) roll mills (2)

                                  Drive:  The first and second mills common turbine drive has been sold. 

First and second mills:

One (1) Intermediate Gear with 63 tooth, 16" face width, and 
            One (1) Intermediate Pinion Gear with 19 tooth, 19" face width, and
            One (1) Open Gear (final drive) with 67 tooth, 19" face width, Spur Gear.

One (1) Lufkin Enclosed Intermediate Speed Gear Reducer, Model Number:  D640C, Service Rating:  500 HP, Input Speed:  1150 RPM, Ratio:  13.7:1, Service Factor:  1.7.         

One (1) Lufkin Enclosed High Speed Gear Reducer,  Model Number:  NM106C,  Service Rating:  500 HP, Input Speed:  4400 RPM, Ratio:  3.827:1, Service Factor:  1.82.   

Transmission (Crusher):       

Crusher:  



Fulton, 39?X 81?WITH 17?x 22? journals, TWO (2) ROLL crusher