Delivery: In Stock
Price: $20,000.00
Mobility: 4 Caster assemblies provide easy mobility
Color: Osha Safety Blue
Conveyor Guides Stainless Steel
Heat Zone Covers Perforated Aluminum
Insulated Panels Aluminized Steel
Structure Mild steel fabrication and tubing
Construction
The T-3 short wave section has an adjustable air knife to provide a laminar flow of air on the product.
All three heat zones have blowers which result in the product seeing a combination of direct infrared radiation and warm moving air.
Each zone includes a digital temperature controller which is set at the required temperature and in conjunction with a solid state power controller, maintains heater temperature.
All three heat zones can be operated simultaneously, individually or in any combination.
Electrical
Operation
Zone Length: 15 inches
6,600 watts total
1,100 watts each
Power:
Heated Length: 22 inches (Across Conveyor)
Qty: 6 Tubes
Zone 3 Quartz Lamps Medium Wave
Zone Length: 30 inches
12,000 watts total
1,000 watts each
Power:
Note: Lamps are angled to avoid striping
Heated Length: 12 inches (Conveyor Direction)
Qty: 12 Lamps
Zone 2 T-3 Tungsten Lamps Short Wave
Zone Length: 30 in
Power: 7,200 watts each (14,400 watts total)
Heated Area: 24 x 24 square inches
Qty: 2 Panels (12 in. x 24 in. each)
Zone 1 - Ceramic Panel Heaters Medium Wave
Heat Zones:
Speed Variable 0-15 ft/min
Length 120 in. (10 ft)
Width 24 in. (2 ft)
Belt Type Flatex Wire Belt
Conveyor:
480 volts, 3 ?, 55 amps
Power Requirements:
Charge (Entrance) and Discharge (Exit): 24 inches each
Heat Area Length: 75 Inches
126 inches long X 32 inches wide X 80 inches high
Physical Size:
Price: $20,000.00
Delivery: In Stock
Price: $20,000.00 Delivery: In Stock |
Model: YPO-072 YPO-270 YPO-480 YPO-600 YPO-720 YPO-1000 Main Parameters: Temperature range: RT+25℃~200℃/300℃/400℃(other temps are optional) Temperature fluctuation: ±0.3℃ Temperature uniformity: ±1%℃(200℃)/±2%℃(300℃) Heat-up time depends on the size ...
Nitrogen oven can provide an anaerobic environment for drying or baking samples. Normally we use carbon dioxide or nitrogen for anaerobic heat treatment. Pressure curing oven is used for electronic, batteries industry, scientific research, laboratory research, aerospace, ...
The oven can be customized, including but not limited to: height (1-4 layers), number of disks (1-16 disks), energy (electricity/gas), operating panel (computer control/dial control), specifications, appearance details, etc., can be ordered in large ...
Come From Guangzhou Hao Maijia baking equipment manufacturin