VEGETABLE SLICERS RCS-60A

After removing, wash attachment with only nonabrasive detergents.
After washing, wipe away any remaining moisture with a dry towel.
The attachment is dishwasher and boiling water-safe. Be careful not to get burned when using hot water.
 
 
 
 
SPECIFICATION
All units can cut any type of vegetable. However, for best results, it is recommended that the specific vegetable types indicated for each unit be used.
Model RCS-60A
Watts 6150W
Weight 14kgs
Dimensions W14.2" x H17" x L14.2"(W362mm x H432mm x L362mm)
Vegetable Type Spherical Leaf Structured
Approximate cutting time 2-3 mins / cabbage head
Slice Thickness 0"-.19" (0-5mm)
 

Turn off power, unplug power cord from outlet, and make sure the unit is not moving.
Trim the onion of its top and bottom ends. Peel. (The largest diameter of any onion that can be accommodated is 4.13 inches and 3.54 inches on either sides of the attachment.)
Putting the cut side down, begin filling in both sides of the attachment with onions. Never place onions in the machine higher than the height of the drum. Doing to will result in machine malfunction and personal injury.
Adjust the thickness of your onions to your desire. Plug in the machine. Begin to process by switching the machine to on.
When the onions have reached a low level in the processor, stop the machine and reload. Continue the steps as described above until all onions have been processed. Caution: Never place onions in the machine while it is in use. Doing so will result in machine malfunction and personal injury.
How to Care for the Onion Attachment

Turn off power, unplug power cord from outlet, and make sure the unit is not moving.
Insert your finger into the eyelet opening on the attachment. Pull straight up and remove.
How to Use the Onion Attachment

Turn off power, unplug power cord from outlet, and make sure the unit is not moving.
As demonstrated in the picture, with the attachments teeth facing up and with the flat sides parallel to the user, use both hands and slowly lower the attachment into the machine.
Using both hands, lightly press on the attachment so as to completely insert it into the feeding hole of the unit. Do not use more pressure than necessary to accomplish this task.
Insert completely until the teeth hit the top of the drum stopping it from going in any further. When inserting, make sure the attachment does not go in diagonally. When the attachment is inserted, it makes the machine unstable. Be sure to always use two attachments to avoid any instability while in use.
How to Remove


 How to Attach

OPTIONAL RCS-60A Attachment Directions

RCS-60A
UNIT FEATURES and CHART  
The turning drum and round blade is designed so that the cabbage is self-feeding and slices freely. Cutting time for 1 head cabbage is 2-3 minutes. Cut cabbage in half and remove the core and feed into drum. 
 

Description There is no need to press on the cabbage while slicing.

  • Country:United States
  • telephone:1-310-323-5299
Description There is no need to press on the cabbage while slicing.
*Your name:
*Your Email:
*To:J.C. uni-tec, Inc.
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

MKJ 250.6 (MKJ 250.7) vegetable slicer

MKJ 250.6 (MKJ 250.7) vegetable slicer ...

Come From Ma Ga company

VEGETABLE SLICERS DRC-80A

Description This is a high speed grade-up cabbage slicer of model RCS-60A which equipped with a drum that can slice 4~5 heads ...

Come From J.C. uni-tec, Inc.