ice planner

7.Pay attention to the blade when cleaning, so that the fingers will not be injured.

6.Every the water in left in the slot should be cleaned after using.

5.The cleaning process should be operated by clothes but not by water.

4.The quantity of the ice should be lower than the place that is high than the red line by 1cm in the slot.

3.The machine should be fixed at a flat place and the quantity of the ice should be thrown into the slot uniformly to prevent the body from shaking.

2.The lid should be equipped with protection device, which makes this machine impossible to operate if the lid has not been closed even if the start button has button pressed.

1.The voltage should be the 220V

Attention:

6.Diameter of the ice-block of 4-5cm is preferable,.

5.Modulate the blade according to the need of the shapes of the ice.

4.Press the start button.

3.Opn the lid of the water-cooling machine and then put some ice-blocks before close the lid.

2.Check the power cable. Turn off the switch and plug the power.

1.Open the lid and sweep the slot. And then check the blades to be stably fixed.

Performance and characters (Instruction):

Weight: 20kg

Capacity: 6kg/min

Size: 380*300*460mm

Power: 250W

Voltage: 220V/50HZ

KS-168 Ice-planner

ice planner