Tapping Bench Machine

Conventional single-phase tapping machine could not be possibly worked as "Instant-Reversal." However, SamwhaENG has developed 0.4kw single-phase motor and the instant-reversible-circuit method as electronic-circuit to be actualized it in the practical-use. Particularly, the newly developed single-phase motor has almost the same power which nearly equates the power of the conventional three-phase motor and can work more than 10 hours in continuance. It also showed the data which will never exceed the maximum allowable temperature even when there are instant-reversals in the cycle of every 2 seconds. This newly developed Single-Phase Tapping Machine has the method of non-existence of the contact-point so that it is soundless as well as the vibration has been reduced. Conventional three-phase tapping machine is very difficult to move around while Single-Phase Tapping Machine is very easy to move at any site. Thus, either in home or the factory, if there is 110v or 220v outlet then you can work it on everywhere. And when you are using this kind of electrical equipment, electricity bill is very high but using this "Single-Phase Tapping Machine" will give you the relief since it has developed as 400w which can be used in very low power-consumption. It will reduce the electricity bill off from your burden. It output the same power of conventional three-phase tapping machine and developed as to be used in single-phase 110vac or 220vac which is the World's first. And also, it can be worked as "Instant Reversal" as well as various technologies (figures) had been patented accordingly.