Mazak Model H-630X CNC FMS System

Specifications and Equipment are Preliminary, Subject to Buyer Verification.

Click on or paste the link below to see an under power video: Video on YouTube

Availability: Immediate

NOTE:  Machine sold As Is, Where Is, on location. Subject to Prior Sale.

NOTE:  Mazak FMS is Located in an Aerospace Facility and Can Be Inspected Under power.

      Work Piece Measurement Results Via Spindle Mounted Touch Sensors (No Actual Probes with)

      Reduction of Multiple Setup Air Cutting

      Automatic Fixture Offset Compensation

      Automatic Compensation for various pallet/machine combinations

      Pallet Mounted Read/Write Chips

Pallet Management System

160 Station Tool Hive Per Machine (320 Total Tools in FMS) - 2 Speed Tool Changer 15,000 RPM Spindle Per Machine Thermal Cooling Management Through Column & Machine Thermal Coolant Control System Ballscrew Cooling System Read/Write Chip in Each Pull Stud 1000 PSI Coolant Through the Spindle Barnes Chip/Coolant System

Probe w/Download Data Port

One (1) Load/Unload Station

Twenty (20) Pallet FMS System

Mazak TP-500 Tool Presetter

Full 5-Axis Trunnion Table

EIA Tool Breakage Recovery

25,810 Blocks/10,748 ft Total RAM Memory High Precision Linear Scale Feedback for X,Y and Z Axis.

254 Parking Option

Mazak M32A CNC Control - 2 MB in each Control Data Server Box: 40 MB per machine Mazak Intelligent Mazatrol FMS Control System High Speed Machine Mode: G61.1

Equipped with:

Approximate Weight of Each Machine              44,000 LBS (2 Machines = 88,000 LBS)

Automatic Tool Changer Capacity                 160 ATC (Per Machine - 320 Total Tools in FMS)

Cutting Feed Rate (B-Axis)                      1440 Deg/Min

Rapid Traverse Rate (B-Axis)                    9000 Deg/Min

Cutting Feed Rate (A-Axis)                      720 Deg/Min

Rapid Traverse Rate (A-Axis)                    1800 Deg/Min

Cutting Feed Rate (X, Y & Z-Axes)               314.96 IPM

Rapid Traverse Rate (X, Y & Z-Axes)             787.40 IPM

Maximum Spindle Speed                     15,000 RPM

Spindle Taper                                   50 Taper

Spindle Motor                                   30/35 HP

      in Y-Axis Plus Direction from Pallet            19.69

      in Y-Axis Minus Direction from Pallet           11.81

Distance Between Spindle Center & Pallet Center When Table is Vertical:

Distance Between Spindle Nose & Pallet Top            3.94 to 33.46 (when table is vert.)

Distance Between Spindle Center & Pallet Top    -11.81 to 19.69 (when table is horz.)

Distance Between Spindle Nose & Pallet Center   7.87 to 37.4 (when table is horz.)

Maximum Workpiece Size                    24.8 Diameter x 19.7 High

B-Axis (Rotary) Travel                          0 to 360 Degrees

A-Axis (Table Tilt) Travel                      -10 to 100

Z-Axis (Cross ) Travel                          29.53

Y-Axis (Spindle Head Vertical) Travel                 31.50

X-Axis (Table Longitudinal) Travel              27.95

      When Pallet is Vertical                   1265 LBS

      When Pallet is Horizontal                 1540 LBS

Pallet Loading Capacity:

Pallet Size                               19.69 x 19.69

Number of Pallets in FMS System                 20

Number of Machines                              2 - H-630-5x each with Trunnion Tables

Specifications:

(1) Used Mazak Model H-630-5x 5-Axis (2-Machine) CNC Horizontal Flexible Manufacturing System, New 1995

( 1) Used Mazak Model H-630-5x 5-Axis (2-Machine) CNC Horizontal Flexible Manufacturing System, New 1995, 20 Pallets, 15K RPM. . +