Contact person: Mr. Nishikant Patil (09860998911)
Fax Ph: 0230 2460651
Kolhapur - 416 122.
Behind Kolhapur Axle, M.I.D.C. Shiroli,
Plot No.3768, Sr,No.595/2,
VISION ELECTROMECH
Address for Contact:
SPECIFICATION | ||||||
UNIT | 3520 | 4025 | EURO | 5030 | 6040 | |
Work Tank Dimensions | mm | 600 x 370 x 250 | 650 x 400 x 300 | 750 x 450 x 400 | 750 x 450 x 400 | 900 x 600 x 400 |
Table Size | mm | 350 x 200 | 400 x 250 | 500 x 300 | 500 x 300 | 600 x 400 |
X - Axis Travel | mm | 200 | 250 | 280 | 280 | 325 |
Y - Axis Travel | mm | 120 | 150 | 200 | 200 | 225 |
Z - Axis Travel | mm | 150 | 150 | 150 | 250 | 250 |
Maximum Job Height | mm | 140 | 165 | 200 | 200 | 250 |
Maximum Job Weight | Kgs. | 100 | 150 | 250 | 250 | 300 |
Machine Weight | Kgs. | 450 | 800 | 850 | 850 | 1200 |
Day Light | mm | 410 | 500 | 500 | 600 | 600 |
Throat | mm | 275 | 340 | 340 | 340 | 425 |
CONTROLLER | ||||||
Maximum Current | mm | 20 | 20 | 20 | 35 | 35 |
Best MRR(Cu to Steel) | mm? | 140 | 140 | 140 | 240 | 240 |
Best Surface Finish | ?Ra | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 |
Minimum Electrode Wear | % | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 |
Maximum Electrode Weight | Kgs. | 20 | 25 | 35 | 35 | 60 |
Connected Load | KVA | 2 | 2 | 2 | 3 | 3 |
ON Time Settings | Nos | 16 | 16 | 16 | 16 | 16 |
Duty Cycle Settings | Nos | 16 | 16 | 16 | 16 | 16 |
DIELECTRIC TANK | ||||||
Dielectric Tank Capacity | Lits. | 100 | 200 | 200 | 200 | 400 |
Filter 10 ? mm | Nos | 1 | 1 | 1 | 1 | 3 |
GENERAL | ||||||
Gross Weight | Kgs. | 600 | 1100 | 1300 | 1300 | 1600 |
Overall Dimensions | Mtrs. | .8 x .8 x 1.8 | 1.1 x 1.2 x 2.2 | 1.1 x 1.2 x 2.1 | 1.1 x 1.2 x 2.2 | 1.2 x 1.3 x 2.2 |
***We have developed Portable TAP DISINTEGRATOR EDM for removing Broken Drills & Taps.@ 50 kg weight. Very easy to carry any where. One can put the machine on Bigger job OR put the job on machine. Very competitive Price.
WE MANUFACTURE SPM EDM's
We undertake Reconditioning of old Electric Discharge Machines. We deal only controllers for old EDMs.CARBIDE CONTROLLERS ON REQUEST.
After sales service: within 48 hour, after receiving the complaint.
Very Low brake down rate.
Material Removing Rate is 7 mm?/Amp/Min.
Less than 0.1% wear of master.
0.5 ?mm Surface finish.
Built in OVSP for prevention of single phasing & over voltage.
Polarity changing facility Built in & free of cost.
Reverse Sparking facility Built in & free of cost.
100 ON Time & 100 OFF Time settings, you will get 10000 settings.
Micro-stepping Motor.
Digital Controller with micro controller base & PLC Logic control.
Indigenously designed & developed specially, to suit the Indian Conditions.
CONTROLLER:
Cylindrical sparking Assembly (For sparking on Rollers)
Rotary Sparking Assembly for EDM Drilling.
Three Axis DRO (Digital Read Out System)
EXTRA ACCESSORIES:
Flushing Pot for Holding Small Work piece.
Flush Aid with Permanent Magnet.
Flat Electrode Holder.
Vee Holder for round & square electrode Holder.
Third Axis Corrector for ZZ Plane.
Axis corrector for XZ & YZ Plane, correction of electrode.
STANDARD ACCESSORIES:(Free with machine)
Easy table movement & Positive Brakes.
Table movement is on L.M. Guides & Block to avoid friction & wear after some period.
Least count is 0.005 mm.
Ball screws are fitted for high accuracy (All 3 Axis).
Slides made of C.I. Grade 25.
TABLE:
Electrical discharge machining (EDM) is one of the most extensively used non-conventional material removal process. Invented in 1940s, it attracts more and more research for the need of the industrial production, and the scientific experiments. The removal of metals in this process is characterised by the erosive effects from a series of electrical sparks generated between tool and work materials with constant electric field emerged in dielectric environment. EDM can machine any electrically conductive part regardless of its hardness. The process is typically used for manufacture of moulds, dies and automotive, aerospace and surgical components. In addition, EDM does not make direct contact between the electrode and the work piece eliminating mechanical stresses, chatter and vibration problems during machining. The process has been accepted as the standard machining process in many industries
WHAT IS EDM?
Table movement is on L. M. Guides & Block. Ball screws are fitted for high accuracy. Digital Control Panel. Low wear, high MRR.
Delivery Time: | 6 to 8 Week |
Package: | Full Wooden Packing. |
Supply Ability: | 5 Bag/Bags per Month |
Minimum Order Quantity: | 1 Bag/Bags |
Payment Terms: | L/C,T/T,Western Union,MoneyGram,INR |
Port: | Mumbai |
FOB Price: | Other250,000 - 550,000 |
1.The frame of this instrument is made of metal. 2.Its model is beautiful. 3.It has the advantages of small volume, low weight,large capacity,low noise, high efficincy and so on. 4.It can be used in hospitals and biochemical labs for qualitative analysis of serum.urea and ...
Come From Chengdu Volador Medical Co.Ltd.
Origin: Jiangsu, China Brand Name: Registration Product Name: Portable Electric Shoe Drying Machine Power: 150W Material: ABS Warranty period: 1 year Heating type: PTC heating Temperature: Constant temperature Voltage: 220V/110V Application: Most shoes and socks ...
Come From Enrol International Trade Co., Ltd
Automatic weatherproof electrical outlet box, flush mount electrical enclosure roll forming machine for making wall mounted switchboard enclosures, network box, circuit breaker enclosures, network enclosure. https://www.superdamc.com Flush mount electrical enclosure forming ...
Come From Shenzhen Superda Machine Co.,Ltd