HYDRAULIC BAR FEEDER

The automatic bar feeder is used in the machine-tool industry and in particular, for automatic lathe feeding. It is particularly suitable for feeding fixed or sliding headstock lathes, operated by numerical control or cams. The working cycle is controlled by a PLC in the electrical cabinet, able to dialogue with the lathe control.The simplified machine controls are located on the electrical cabinet door. The programming keypad serves to enter the necessary parameters for correct operation of the machine. The bar feeder can be used to feed bars, pipes and various section profiles. The guide channel is fully closed during machining; a pump is maintains a continuous oil flow inside the channel, creating a hydrodynamic support effect; these characteristics allow the bar to rotate at high speed, with no vibration and no surface damage. CHNICAL SPECIFICATION Bar diameter ?3mm(1/8")~26mm(1") ?3mm(1/8")~22mm(7/8") Magazine capacity 280mm ?10mm x 28 bar Voltage 220-400 volt 50Hz/60Hz Control voltage 24 volt D.C. Power 1.5 KW PLC control & servo motor PLC and servo motor Feed speed 500mm/sec. MAX (adjustable) Return speed 500mm/sec. MAX (adjustable) Bar change time 30 sec (for 3 meter bar) Guide channel oil ISO CKB 100. 18L Compressed air 6kg/cm? Weight 555~750kg