The Okuma LT Series Twin Spindle, Twin Turret Turning Center is ideal to balance cycle times for first and second operation. Both turrets can work on the workpiece in the left or the right spindle
to optimize cycle time and balance throughput of first and second operation. Machine can be manually loaded in both spindles or part may be automatically transferred from left spindle to right
spindle and reversed in transfer to enable first and second operation positioning of the workpiece. Mulit-Function machining, otherwise known as Mill and Drill function (Mill/Drill), enables
complete workpiece processing of the most complex parts. The Y-Axis function that allows milling above centerline further optimizes the machine capability. Machining flats or contours on the
periphery of the workpiece are easily programmed. High rapid traverse rates ( up to 1574 inches per minute ) and high spindle speeds ( 6000 RPM ) reduce overall cycle times. The machine is
available in two sizes. The LT200 is a 15 HP machine and and the LT300 is a 30 HP machine. ** This machine also has but sold seperately 6 RT Angle (EC) Live Holder, 2 RT Angle (EC) Live Holder 2:1,
4 Straight (EC) Live Holder that are all WTO brand which are German made.** **SPINDLE RUN TIME 653 HOURS** ** Installed April, 2007 **
Okuma LT-300 SB/SBM w/P100
The Okuma LT Series Twin Spindle, Twin Turret Turning Center is ideal to balance cycle times for first and second operation. Both turrets can work on the workpiece in the left or the right spindle to optimize cycle time and balance throughput of first and second operation. ...
Come From Hitech Machinery Corpn